本方法对所有NVIDIA的显卡都有效。前提是必须把kernel source安装上，如果弟兄们升级有错误可能就是gcc或者kernel source没有安装上。如果出现问题，就要把错误信息发上来，这样才能高效解决问题。发帖时不要忘记说自己的所用的版本，以及硬件信息等。多谢。
1]下载显卡的驱动tar包，只要是NVIDIA的，这两个包都适用：
www.linuxsir.org/driver/nvidia/NVID...1.0-3123.tar.gz
www.linuxsir.org/driver/nvidia/NVID...1.0-3123.tar.gz
安装：[经quanlinking兄指教，make时是有先后顺序的，要先make NVIDIA_kernel-1.0-3123]
# tar zxvf NVIDIA_GLX-1.0-3123.tar.gz
# tar zxvf NVIDIA_kernel-1.0-3123.tar.gz
# cd NVIDIA_kernel-1.0-3123
# make
# cd NVIDIA_GLX-1.0-3123
# make
把/etc/X11中的XF86Config-4文件中的nv改成nvidia。其它注销项目，请见我的XF86Config-4文件。有些版本没有这个文件,可以修改XF86Config文件.
/etc/X11/XF86Config-4文件，有些版本没有这个文件,可以修改XF86Config文件.
用下面的来参考
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
如果汉化就把路径加在这里，如果不汉化，就不要加了
FontPath "unix/:7100"
EndSection
Section "Module"
Load "xtt"如果汉化了，在加上这一句没有汉化就不要加了
Load "GLcore"在这句的前面，要加一个#号
Load "dbe"在这句的前面，要加一个#号
Load "extmod"
Load "fbdevhw"
Load "dri"在这句的前面，要加一个#号
Load "glx"
Load "record"
Load "freetype"如果汉化了，也在这句的前面，要加一个#号；没有用汉化，就不要加＃号了
Load "type1"如果汉化了，也在这句的前面，要加一个#号；没有用汉化，就不要加＃号了
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc102"
Option "XkbLayout" "us"
Option "XkbVariant" "basic"
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-62
VertRefresh 50-75
Option "dpms"在这句的前面，要加一个#号
# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
EndSection
Section "Device"
# no known options
Identifier "NVIDIA GeForce 3 (generic)"
Driver "nv"在这里，要把nv改成nvidia
VendorName "NVIDIA GeForce 3 (generic)"
BoardName "NVIDIA GeForce 3 (generic)"
#BusID
EndSection
Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 3 (generic)"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768" "1024x768"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection