15................
One way voice issue
dilan@dpmce.com - SYSTEMS ENGINEER, DPMC ELECTRONICS PVT LTD.
Aug 7, 2003, 3:19am PST
I have tried setting up a basic VoIP configuration between 2 branch sites using 2 service provider networks using Cisco 1750
routers.
One setup was over a frame relay network and the other over a PPTP tunnel link that goes through several intermediate
routers.
The setup worked fine on the frame relay n/w. Over the PPTP link however,the calling party doesn't get the ringback although
the phone at the other end rings. When the called party answers, he can hear the calling party but the latter doesn't receive
the voice stream. This was always the case.
With some debugging I found that the called party sends the RTP voice stream to the wrong RTP port at the calling party. The
port nos were always 2 greater than the correct one.
Eg:- called party sends the voice stream to 18002 when the calling party's end shows that its RTP port should actually be
18000. There was no port mismatch the other way.
Has anyone faced this problem?
benhur.p - Staff, Cosmos Pvt Ltd
Aug 13, 2003, 7:50am PST
I have same problem, any updates on this. can you share with me if you know any workaround. TIA
thusain - CISCO SYSTEMS, CCIE
Aug 13, 2003, 1:23pm PST
What IOS version are you running, and can you post your config.
Taimoor
16..................
CBWFQ
adananm
Aug 11, 2003, 7:34am PST
What does conversation mean with respect to using cbwfq? Please see sample config:
Class-map: class-default (match-any)
334264 packets, 128049372 bytes
30 second offered rate 0 bps, drop rate 0 bps
Match: any
Weighted Fair Queueing
Output Queue: Conversation 266
Bandwidth 2551 (kbps)
(pkts matched/bytes matched) 58/17684
(depth/total drops/no-buffer drops) 0/0/0
exponential weight: 11
mean queue depth: 0
mazhar71 - CONSULTANT, PROBIL, CCIE
Aug 12, 2003, 7:12am PST
Hi,
http://www.cisco.com/en/US/tech/ ... ml#numberallocation
page may help you.
Regards
adananm
Aug 12, 2003, 9:06am PST
Thanks
17.............
VoIP Setup
gul_khan_99 - network engineer, Multinet Broadband Pakistan
Aug 2, 2003, 1:15am PST
We are working on VoIP Project and providing VoIP services for our customers.The following is the description of my project.
In this project, each customer can be assigned an account number and a Personal Identification Number (PIN), they can get
these information from scratch card, which are available on our customers outlets. The user dials a local number like 111-
XXX-YYY, and is connected to the local VoIP point of presence.
The user is then prompted by the Integrated Voice Response (IVR) to input the account and PIN numbers, and following an
authentication, after the proper authentication, a second dial tone allows the user to enter the target number. The user
dials destination phone number, which the local Voice Gateway maps to an IP address of a remote-zone Voice Gateway.
The remote-zone Voice Gateway then selects a gateway to terminate the call. This completes the call set up. During the call
setup the accounting is going on Database Server through AAA Radius and calculate the time duration and total minute use by
the caller and after termination of the call, billing automatically update user accounts with current statistics.
I need help on this project regarding equipment selection and their configuration.Can any one share his/her experience with
me.
Thanks for your cooperation.
vmoopeung
Aug 7, 2003, 1:27pm PST
May be this is a good place to start
http://www.cisco.com/en/US/netso ... vices_overview.html
aabbasi@teleping.com
Aug 7, 2003, 1:48pm PST
Hi,
I can help you implement this project locally. Feel free to contact me via e-mail.
Best regards,
18...............
Voip call will wait long time (12 seconds) to get ring back tone
mishao - Network Engineer, NETSTAR TAIWAN
Aug 5, 2003, 7:44pm PST
hi,
I setup 2* 3725 with alcatel PABX (T1 cas).the voip call is fine. But the problem is that we required to wait 12 seconds to
hear the ring back tone.
attached configuration.
best regards.
fred.
TTNTaiwanQuanta#s run
Building configuration...
Current configuration : 5003 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname TTNTaiwanQuanta
!
logging buffered 4096 debugging
enable password ttnnet!
!
username hongson password 0 hongson
clock timezone Taiwan 8
voice-card 1
!
ip subnet-zero
!
!
!
!
!
voice call carrier capacity active
voice rtp send-recv
voice dsp auto-reset
!
voice service voip
!
!
!
!
!
!
!
!
!
mta receive maximum-recipients 0
!
controller E1 1/0
framing NO-CRC4
ds0-group 1 timeslots 1-15,17-30 type e&m-immediate-start
cas-custom 1
!
controller E1 1/1
framing NO-CRC4
ds0-group 1 timeslots 1-15,17-30 type e&m-immediate-start
cas-custom 1
!
!
!
!
interface Loopback0
ip address 192.168.248.250 255.255.255.255
!
interface Multilink1
ip address 10.10.10.1 255.255.255.252
ip tcp header-compression iphc-format
fair-queue 64 32 4
traffic-shape group 106 1300000 31200 31200 1000
no cdp enable
ppp multilink
ppp multilink fragment-delay 25
ppp multilink interleave
multilink-group 1
ip rtp header-compression iphc-format
!
interface FastEthernet0/0
ip address 192.168.66.248 255.255.255.0
ip accounting output-packets
no ip route-cache
no ip mroute-cache
duplex auto
speed auto
no cdp enable
!
interface Serial0/0
description TTN IPLC Taiwan to china E1
ip address 192.168.248.1 255.255.255.252
encapsulation ppp
no ip route-cache
no ip mroute-cache
load-interval 30
no keepalive
no fair-queue
no cdp enable
ppp multilink
multilink-group 1
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
no cdp enable
!
interface Serial0/1
description TTN VSAT BACKUP IPLC 512K
bandwidth 1024
ip address 192.168.248.5 255.255.255.252
encapsulation ppp
no ip mroute-cache
priority-group 1
no cdp enable
ppp multilink
multilink-group 1
!
router rip
passive-interface Serial0/0
passive-interface Ser
