1:确定你的内核支持U番
:SCSI的选项默认就可以
:USB的选项一定要安装 USB Mass Storage support
:如下:
代码:
SCSI support
--- SCSI support type (disk, tape, CD-ROM)
SCSI disk support
(40) Maximum number of SCSI disks that can be loaded as modules
SCSI tape support
SCSI OnStream SC-x0 tape support
SCSI CD-ROM support
SCSI generic support
--- Some SCSI devices (e.g. CD jukebox) support multiple LUNs
[*] Enable extra checks in new queueing code
[*] Probe all LUNs on each SCSI device
[*] Verbose SCSI error reporting (kernel size +=12K)
[ ] SCSI logging facility
SCSI low-level drivers ---
PCMCIA SCSI adapter support ---
USB Mass Storage support
[ ] USB Mass Storage verbose debug
[ ] Freecom USB/ATAPI Bridge support
[ ] ISD-200 USB/ATA Bridge support
[ ] Microtech CompactFlash/SmartMedia support
2:fdisk -l /dev/sda看看有没有sda1列出来
3:如果有,
mkdir /mnt/usb
mount /dev/sda1 /mnt/usb -t vfat(当然也可能是msdos)
4:其他:
:在/etc/fstab里面加入:
[/code]/dev/sda1 /mnt/usb vfat user,noauto,codepage=936,iocharset=cp936,umask=022 0 0[/code]
可以保证任何一个用户都可以mount USB番,并且启动时不加载
:关于中文,在本站有很多相关的文章,自己编译内核,把CP936编译成为Native Language。