软件要求：
Solaris
9
Sun Cluster 3.1
Veritas
VxVM 3.5(需要VxVM的License和Cluster Volume Manager(CVM)的License )
Oracle 9i Enterprise Edition
Sun 3310阵列驱动
硬件要求：
Sun 480
两台
Sun QFE四口网卡
2块
Sun SCSI卡X6758A
2块
Sun 3310阵列
2台
一、安装硬件
二、配置阵列3310，要求如下：
要求如下：
两台都一样
c2t5d0
quorum盘
512M
c2t5d1
ora-rac-dg Log盘
256M
c2t5d2
ora-rac-dg 盘
140G
c2t5d3
ora-arc-dg Log盘
256M
c2t5d4
ora-arc-dg 盘
剩下的空间
c3t5d0
quorum盘
512M
c3t5d1
ora-rac-dg Log盘
256M
c3t5d2
ora-rac-dg 盘
140G
c3t5d3
ora-arc-dg Log盘
256M
c3t5d4
ora-arc-dg 盘
剩下的空间
三、安装操作系统
以Sun 480 36G硬盘为例，分区如下:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695b66,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695de5,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
format p
partition p
Current partition table (original):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part
Tag
Flag
Cylinders
Size
Blocks
0
root
wm
5808 - 13067
10.00GB
(7260/0/0)
20974140
1
var
wm
13068 - 14519
2.00GB
(1452/0/0)
4194828
2
backup
wm
0 - 24619
33.92GB
(24620/0/0) 71127180
3
swap
wu
0 -
5807
8.00GB
(5808/0/0)
16779312
4 unassigned
wm
0
0
(0/0/0)
0
5 unassigned
wm
14520 - 21779
10.00GB
(7260/0/0)
20974140
6 unassigned
wm
21780 - 22142
512.06MB
(363/0/0)
1048707
7 unassigned
wm
0
0
(0/0/0)
0
四、给操作系统打补丁(采用最新的补丁盘)
# cd
/cdrom/eis-cd/sun/install
# ./setup-standard.sh
# cd /cdrom/eis-cd/sun/patch/9
# ../../install/bin/unpack_patches
# cd /tmp/9
# eject cdrom
# ./install_all_patches
五、安装3310的驱动和补丁
# ls
112697-04
SUNWqus
SUNWqusu
SUNWqusux
SUNWqusx
# pkgadd -d . all
（一路yes即可）
# patchadd 112697-04
在文件/etc/kernel/sd.conf文件中加入如下几行：
name="sd" class="scsi" target=5 lun=0;
name="sd" class="scsi" target=5 lun=1;
name="sd" class="scsi" target=5 lun=2;
name="sd" class="scsi" target=5 lun=3;
name="sd" class="scsi" target=5 lun=4;
# reboot
重起后，使用format命令检查磁盘阵列的配置是否正确。
# format
Searching for disks...done
c2t5d0: configured with capacity of 510.00MB
c2t5d1: configured with capacity of 254.00MB
c2t5d2: configured with capacity of 136.71GB
c2t5d3: configured with capacity of 254.00MB
c2t5d4: configured with capacity of 66.62GB
c3t5d0: configured with capacity of 510.00MB
c3t5d1: configured with capacity of 254.00MB
c3t5d2: configured with capacity of 136.71GB
c3t5d3: configured with capacity of 254.00MB
c3t5d4: configured with capacity of 66.62GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c5069619e,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695ef2,0
2. c2t5d0 <SUN-StorEdge3310-0325 cyl 510 alt 2 hd 64 sec 32
/pci@8,700000/pci@3/scsi@4/sd@5,0
3. c2t5d1 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32
/pci@8,700000/pci@3/scsi@4/sd@5,1
4. c2t5d2 <SUN-StorEdge3310-0325 cyl 35273 alt 2 hd 127 sec 64
/pci@8,700000/pci@3/scsi@4/sd@5,2
5. c2t5d3 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32
/pci@8,700000/pci@3/scsi@4/sd@5,3
6. c2t5d4 <SUN-StorEdge3310-0325 cyl 34112 alt 2 hd 64 sec 64
/pci@8,700000/pci@3/scsi@4/sd@5,4
7. c3t5d0 <SUN-StorEdge3310-0325 cyl 510 alt 2 hd 64 sec 32
/pci@8,700000/pci@3/scsi@5/sd@5,0
8. c3t5d1 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32
/pci@8,700000/pci@3/scsi@5/sd@5,1
9. c3t5d2 <SUN-StorEdge3310-0325 cyl 35273 alt 2 hd 127 sec 64
/pci@8,700000/pci@3/scsi@5/sd@5,2
10. c3t5d3 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32
/pci@8,700000/pci@3/scsi@5/sd@5,3
11. c3t5d4 <SUN-StorEdge3310-0325 cyl 34112 alt 2 hd 64 sec 64
/pci@8,700000/pci@3/scsi@5/sd@5,4
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
format q
六、配置/etc/hosts文件和/.profile文件
rac1:
root@rac1 # cat /etc/hosts
#
# Internet host table
#
127.0.0.1
localhost
192.168.0.201
rac1
loghost a.b
192.168.0.202
rac2
在/.profile文件中加入以下内容：
PATH=$PATH:/usr/cluster/bin:/etc/vx/bin
export PATH
MANPATH=$MANPATH:/usr/cluster/man:/usr/share/man:/opt/VRTS/man
export MANPATH
rac2:
root@rac2 # cat /etc/hosts
#
# Internet host table
#
127.0.0.1
localhost
192.168.0.202
rac2
loghost a.b
192.168.0.201
rac1
在/.profile文件中加入以下内容：
PATH=$PATH:/usr/cluster/bin:/etc/vx/bin
export PATH
MANPATH=$MANPATH:/usr/cluster/man:/usr/share/man:/opt/VRTS/man
export MANPATH
七、安装Sun Cluster 3.1，并打Sun Cluster 3.1的补丁
建立主节点：
# cd
/opt/suncluster_3_1/SunCluster_3.1/Sol_9/Tools
# ./scinstall
*** Main Menu ***
Please select from one of the following (*) options:
* 1) Establish a new cluster using this machine as the first node
* 2) Add this machine as a node in an established cluster
3) Configure a cluster to be JumpStarted from this install server
4) Add support for new data services to this cluster node
5) Print release information for this cluster node
* ?) Help with menu options
* q) Quit
Option:1
*** Establishing a New Cluster ***
This option is used to establish a new cluster using this machine as the first node in that cluster.
Once the cluster framework software is installed, you will be asked for the name of the cluster. Then, sccheck(1M) is run to test this machine for basic Sun Cluster pre-configuration requirements.
After sccheck(1M) passes, you will be a
