c110 错误: reading model information status=-3问题描述
我在我的C110上替换了 CPU 主板，
但是现在系统在识别该模型时遇到了困难。 有时，它的ID为9000/777/c110，
有时为 9000/800。 尤其是ss_config 没有在系统中运行， 如果替换IO卡，它将会提示我在启动时输入lan station 地址，当出现这种识别问题时，我会得到下面的信息：
ERROR: reading model information status=-3
mapper shows can't read model string pdc_model status=-3.
应该怎样解决这种 J 或 C 系列 系统的硬件问题?
配置信息
操作系统 - HP-UX
版本 -
硬件系统 - HP 9000
系列 -
解决方法
在这种情况下，在启动控制台例程中使用默认的PDC，这样这个问题就会得到解决.
可选关键字
status = -3
c160
c180
c200
c240
.........following with all English text ....c110 ERROR: reading model information status=-3Problem Description
I replaced the CPU board on my C110, but now the system is having a hard time identifying the model. Sometimes it id's it as a 9000/777/c110, sometimes as a 9000/800. Typically ss_config is not run on this system, if the io card is replaced it will prompt me to enter the lan station addresses at power up. When the
identification problem occurs I get message:
ERROR: reading model information status=-3, mapper shows can't read model string pdc_model status=-3.
How is this J or C series system hardware problem fixed?
Configuration Info
Operating System - HP-UX
Version -
Hardware System - HP 9000
Series -
Solution
In this case defaulted PDC from the boot console handler, and this cleared the problem.
Alternative Keywords
status = -3
c160
c180
c200
c240
