at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PK9S-M), Version 12.2(17a)SX1, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Wed 29-Oct-03 08:16 by cmong
Image text-base: 0x40008FBC, data-base: 0x41E50000
This prodUCt contains cryptographic features and is subject to United
States and local country laws governing import, eXPort, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.Html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6509 (R7000) processor (revision 3.0) with 458752K/65536K bytes of
memory.
Processor board ID SAL0743NKW8
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
36 Gigabit Ethernet/IEEE 802.3 interface(s)
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Logging of %SNMP-3-AUTHFAIL is enabled
Press RETURN to get started!
--- System Configuration Dialog ---
Would you like to enter the initial dialog? [yes]: no
回答：NO，进入手工配置，在router>下，输入enable
回车，进入全局模式
2.2. 远程telnet连接
当完成交换机配置，并起给交换机配置了治理地址，就可以直接采用远程telnet登
陆进入交换机了，但是必须先配置