Switch Configuration
!-- Generate & verify RSA key:
sec-cat6000 (enable) set crypto key rsa 1024
Generating RSA keys..... [OK]
sec-cat6000 (enable) ssh_key_PRocess: host/server key size: 1024/768
!-- Display the RSA key:
sec-cat6000 (enable) show crypto key
RSA keys were generated at: Mon Jul 23 2001, 15:03:30 1024 65537 1514414695360
577332853671704785709850606634768746869716963940352440620678575338701550888525
699691478330537840066956987610207810959498648179965330018010844785863472773067
697185256418386243001881008830561241137381692820078674376058275573133448529332
1996682019301329470978268059063378215479385405498193061651
!-- Restrict which host/subnets are allowed to use SSH to the switch.
Note: If you do not do this, the switch will display WARNING!! ip permit list has no entries!
sec-cat6000 set ip permit 172.18.124.0 255.255.255.0
172.18.124.0 with mask 255.255.255.0 added to IP permit list.
!-- Turn on SSH.
sec-cat6000 (enable) set ip permit enable ssh
SSH permit list enabled.
!-- Verity SSH permit list.
sec-cat6000 (enable) sho ip permit
Telnet permit list disabled.
Ssh permit list enabled.
Snmp permit list disabled.
Permit List Mask access-Type
172.18.124.0 255.255.255.0 telnet ssh snmp
Denied IP Address Last Accessed Time Type
