作3层交换
Enter passWord:
ZX_WS4006_1 (enable) sh mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X4013 no ok
3 3 6 1000BaseX Ethernet WS-X4306 no ok
4 4 34 Router Switch Card WS-X4232-L3 no ok
Mod Module-Name Serial-Num
--- -------------------- --------------------
1 JAE060906GZ
3 JAE04470A10
4 JAB052105F2
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- -----------------
1 00-08-e3-86-06-00 to 00-08-e3-86-09-ff 3.2 5.4(1) 6.3(1)
3 00-04-27-55-93-2c to 00-04-27-55-93-31 2.0
4 00-04-9a-50-16-4c to 00-04-9a-50-16-6d 1.7 12.0(7)W5( 12.0(10)W5(18f)
ZX_WS4006_1 (enable) sh config
This command shows non-default configurations only.
Use 'show config all' to show both default and non-default configurations.
.............
..................
..................
....................
..
begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Tue Mar 18 2003, 23:11:06
!
#version 6.3(1)
!
!
#system web interface version(s)
set password $2$ZtNY$yuqPHi7CpjwCs0blr9mxG0
set enablepass $2$rY7u$b9D5DEa661dt46OwWq5ts/
!
#test
set test diaglevel minimal
!
#system
set system name ZX_WS4006_1
set system contact Center-sw
!
#frame distribution method
set port channel all distribution mac both
!
#vtp
set vtp domain cs1yhis
set vlan 1 name default type ethernet mtu 1500 said 100001 state active
set vlan 2 name JiGuan type ethernet mtu 1500 said 100002 state active
set vlan 3 name YeWu type ethernet mtu 1500 said 100003 state active
set vlan 4 name XXZX type ethernet mtu 1500 said 100004 state active
set vlan 100 name yibao type ethernet mtu 1500 said 100100 state active
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state activ
e stp ieee
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active st
p ibm
set vlan 5-20
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state acti
ve mode srb aremaxhop 0 stemaxhop 0 backupcrf off
!
#ip
set interface sc0 1 192.168.1.250/255.255.255.0 192.168.1.255
set interface sl0 192.168.168.1 255.255.255.0
set interface sl0 down
set interface me1 192.0.2.1 255.255.255.0 192.0.2.255
set ip route 0.0.0.0/0.0.0.0 192.168.1.254
!
#dns
set ip dns server 202.103.96.68 primary
set ip dns server 202.103.4.238
!
#syslog
set logging level cops 2 default
!
#set boot command
set boot config-register 0x2
set boot system flash bootflash:cat4000.6-3-1.bin
set boot system flash bootflash:cat4000.5-5-8.bin
!
#mls
set mls nde disable
!
#port channel
set port channel 4/1-2 25
!
#http configuration
set ip http server enable
!
#module 1 : 2-port 1000BaseX Supervisor
set udld enable 1/1-2
!
#module 2 empty
!
#module 3 : 6-port 1000BaseX Ethernet
set udld enable 3/6
set trunk 3/3 on dot1q 1-1005
set trunk 3/4 on dot1q 1-1005
set trunk 3/5 on dot1q 1-1005
set trunk 3/6 on dot1q 1-1005
!
#module 4 : 34-port Router Switch Card
set trunk 4/1 nonegotiate dot1q 1-1005
set trunk 4/2 nonegotiate dot1q 1-1005
set port channel 4/1-2 mode on
!
#module 5 empty
!
#module 6 empty
end
ZX_WS4006_1 (enable)
ZX_WS4006_1 (enable) sess 3
Feature not supported on Module 3.
ZX_WS4006_1 (enable) sess 4
Trying IntlgLineCard-4...
Connected to IntlgLineCard-4.
Escape character is '^]'.
User Access Verification
Password:
VLAN-gwen
Password:
VLAN-gw#sh run
Building configuration...
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname VLAN-gw
!
enable secret 5 $1$j6xO$q2wF0qaki76qo6hr3bYlt.
enable password 7 070E25414707
!
ip subnet-zero
no ip domain-lookup
ip name-server 202.103.96.68
ip name-server 202.103.100.100
!
!
!
interface Port-channel1
description This is interface is configured for routing with native vlan 1 to 4
no ip address
no ip redirects
no ip directed-broadcast
hold-queue 300 in
!
interface Port-channel1.1
encapsulation dot1Q 1 native
ip address 192.1.1.254 255.255.255.0 secondary
ip address 192.168.1.254 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface Port-channel1.2
description This interface is connected to vlan 2 which is connected to vlan
encapsulation dot1Q 2
ip address 192.168.2.254 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface Port-channel1.3
description This interface is connected to vlan 3 which is connected to vlan 3
encapsulation dot1Q 3
ip address 192.168.3.254 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface FastEthernet1
description This is the out of band interface that you can use for management
ip address 172.168.1.1 255.255.255.0
no ip directed-broadcast
!
interface GigabitEthernet1
no ip address
no ip directed-broadcast
!
interface GigabitEthernet2
no ip address
