分享
 
 
 

BGP配置例子

王朝other·作者佚名  2008-05-31
窄屏简体版  字體: |||超大  

点击查看大图

CAT 1

CAT1 (enable) show running-config

begin

!

# ***** NON-DEFAULT CONFIGURATION *****

!

!

#version 6.3(5)

!

#system

set system name CAT1

set system highavailability enable

!-- Enables high availability on Catalyst switch.

!

#vtp

set vtp domain cisco

set vlan 1 name default type ethernet mtu 1500 said 100001 state active

[..]

set vlan 10,20

!

#set boot command

set boot config-register 0x2102

set boot system Flash bootflash:cat6000-sup.6-3-5.bin

!

#module 3 : 48-port 10/100BaseTX Ethernet

set vlan 10 3/2

!-- Port 3/2 is connected to AS10 on VLAN 10.

!

#module 5 : 8-port 1000BaseX Ethernet

set module name 5

set trunk 5/2 on isl 1-1005,1025-4094

!-- Port 5/2 is connected to CAT 2 as Trunk.

!

#module 15 : 1-port Multilayer Switch Feature Card

!-- MSFC #1 on Port 1, Mod 15.

!

#module 16 : 1-port Multilayer Switch Feature Card

!-- MSFC #2 on Port 2, Mod 16.

CAT 2

CAT2 (enable) show running-config

begin

!

# ***** NON-DEFAULT CONFIGURATION *****

!

!

#version 6.3(5)

!

#system

set system name CAT2

set system highavailability enable

!-- Enables high availability on Catalyst switch.

!

#vtp

set vtp domain cisco

set vlan 1 name default type ethernet mtu 1500 said 100001 state active

set vlan 10,20

!

#set boot command

set boot config-register 0x2102

set boot system flash bootflash:cat6000-sup.6-3-5.bin

!

!

#module 3 : 48-port 10/100BaseTX Ethernet

set vlan 20 3/3

!-- Port 3/3 is connected to AS20 on VLAN 20.

!

#module 4 : 8-port 1000BaseX Ethernet

set module name 4

set trunk 4/2 on isl 1-1005,1025-4094

!-- Port 4/2 is connected to CAT 1 as Trunk.

!

#module 15 : 1-port Multilayer Switch Feature Card

!-- MSFC 1 on Port 1, Mod 15.

!

#module 16 : 1-port Multilayer Switch Feature Card

!-- MSFC #2 on Port 2, Mod 16.

MSFC Configuration on CAT1

CAT1 (enable)

CAT1 (enable) session 15

Trying Router-15...

Connected to Router-15.

Escape character is '^]'.

MSFC-CAT1enable

MSFC-CAT1#show running-config

Building configuration...

Current configuration : 868 bytes

!

version 12.1

!

hostname MSFC-CAT1

!

boot system bootflash:c6msfc2-jsv-mz.121-8b.E7

!

ip subnet-zero

!

!

!

redundancy

!-- This command enables redundancy.

high-availability

!-- This command enables high availability.

single-router-mode

!-- This command enables SRM.

!

interface Vlan10

ip address 192.168.1.1 255.255.255.0

!-- Interface Vlan10 is connected to AS10.

!

interface Vlan20

ip address 192.168.2.3 255.255.255.0

!-- Interface Vlan20 is connected to interface Vlan20 on CAT2 via the trunk.

!

router bgp 4

no synchronization

bgp log-neighbor-changes

network 192.168.0.0 mask 255.255.0.0

neighbor 192.168.1.2 remote-as 10

!-- This command establishes eBGP peering with AS10.

neighbor 192.168.2.1 remote-as 4

!-- This command establishes iBGP peering with interface VLAN 20 on CAT2.

neighbor 192.168.2.1 next-hop-self

!-- This command assigns a next-hop value to 192.168.2.3 !-- for updates sent to 192.168.2.1 (the iBGP peer).

!

ip classless

ip route 192.168.0.0 255.255.0.0 Null0

MSFC Configuration on CAT2

CAT2 (enable)

CAT2 (enable) session 15

Trying Router-15...

Connected to Router-15.

Escape character is '^]'.

MSFC-CAT2enable

MSFC-CAT2#show running-config

Building configuration...

Current configuration : 890 bytes

!

version 12.1

!

hostname MSFC-CAT2

!

boot system flash bootflash:c6msfc-jsv-mz.121-8b.E7

!

ip subnet-zero

!

!

redundancy

!-- This command enables redundancy.

high-availability

!-- This command enables high availability.

single-router-mode

!-- This command enables SRM.

!

interface Vlan10

ip address 192.168.1.3 255.255.255.0

!-- Interface Vlan10 connected to interface Vlan10 on CAT1 via the trunk.

!

interface Vlan20

ip address 192.168.2.1 255.255.255.0

!-- Interface Vlan20 connected to AS20.

!

router bgp 4

no synchronization

bgp log-neighbor-changes

network 192.168.0.0 mask 255.255.0.0

neighbor 192.168.2.2 remote-as 20

!-- This command establishes eBGP peering with AS20.

neighbor 192.168.2.3 remote-as 4

!-- This command establishes iBGP peering with interface Vlan20 on CAT1.

neighbor 192.168.2.3 next-hop-self

!-- This command assigns a next-hop value to 192.168.2.1 !-- for updates sent to 192.168.2.3 (the iBGP peer).

!

ip classless

ip route 192.168.0.0 255.255.0.0 Null0

Troubleshoot

Now that you've verified the high availability SRM configuration, you need to verify the BGP MSFC on CAT1 and CAT2. Use the show ip bgp summary command to verify the neighbor establishment. The output below confirms sUCcessful eBGP and iBGP peering with AS10 and the CAT2 MSFC respectively.

MSFC-CAT1#show ip bgp summary

BGP router identifier 192.168.2.3, local AS number 4

BGP table version is 4, main routing table version 4

3 network entries and 4 paths using 435 bytes of memory

4 BGP path attribute entries using 240 bytes of memory

2 BGP AS-PATH entries using 48 bytes of memory

0 BGP route-map cache entries using 0 bytes of memory

0 BGP filter-list cache entries using 0 bytes of memory

BGP activity 3/14 PRefixes, 4/0 paths, scan interval 15 secs

Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd

192.168.1.2 4 10 90 92 4 0 0 01:26:02 1

192.168.2.1 4 4 91 91 4 0 0 01:25:38 2

Verify the BGP state on the active MSFC in CAT2. The output below confirms successful eBGP and iBGP peering with AS20 and CAT1 respectively

MSFC-CAT2#show ip bgp summary

BGP router identifier 192.168.2.1, local AS number 4

BGP table version is 4, main routing table version 4

3 network entries and 4 paths using 435 bytes of memory

4 BGP path attribute entries using 240 bytes of memory

2 BGP AS-PATH entries using 48 bytes of memory

0 BGP route-map cache entries using 0 bytes of memory

0 BGP filter-list cache entries using 0 bytes of memory

BGP activity 3/0 prefixes, 4/0 paths, scan interval 15 secs

Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd

192.168.2.2 4 20 110 112 4 0 0 01:46:43 1

192.168.2.3 4 4 101 101 4 0 0 01:35:09 2

In the event the designated MSFC (Mod 15 on CAT1) eXPeriences a failure, the standby MSFC (Mod 16 on CAT1) takes over the role of active MSFC. It is important to understand that with the failure of the designated MSFC and fail over to the non-designated MSFC, packet switching will continue to work wit

 
 
 
免责声明:本文为网络用户发布,其观点仅代表作者个人观点,与本站无关,本站仅提供信息存储服务。文中陈述内容未经本站证实,其真实性、完整性、及时性本站不作任何保证或承诺,请读者仅作参考,并请自行核实相关内容。
2023年上半年GDP全球前十五强
 百态   2023-10-24
美众议院议长启动对拜登的弹劾调查
 百态   2023-09-13
上海、济南、武汉等多地出现不明坠落物
 探索   2023-09-06
印度或要将国名改为“巴拉特”
 百态   2023-09-06
男子为女友送行,买票不登机被捕
 百态   2023-08-20
手机地震预警功能怎么开?
 干货   2023-08-06
女子4年卖2套房花700多万做美容:不但没变美脸,面部还出现变形
 百态   2023-08-04
住户一楼被水淹 还冲来8头猪
 百态   2023-07-31
女子体内爬出大量瓜子状活虫
 百态   2023-07-25
地球连续35年收到神秘规律性信号,网友:不要回答!
 探索   2023-07-21
全球镓价格本周大涨27%
 探索   2023-07-09
钱都流向了那些不缺钱的人,苦都留给了能吃苦的人
 探索   2023-07-02
倩女手游刀客魅者强控制(强混乱强眩晕强睡眠)和对应控制抗性的关系
 百态   2020-08-20
美国5月9日最新疫情:美国确诊人数突破131万
 百态   2020-05-09
荷兰政府宣布将集体辞职
 干货   2020-04-30
倩女幽魂手游师徒任务情义春秋猜成语答案逍遥观:鹏程万里
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案神机营:射石饮羽
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案昆仑山:拔刀相助
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案天工阁:鬼斧神工
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案丝路古道:单枪匹马
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:与虎谋皮
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:李代桃僵
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:指鹿为马
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案金陵:小鸟依人
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案金陵:千金买邻
 干货   2019-11-12
 
推荐阅读
 
 
 
>>返回首頁<<
 
靜靜地坐在廢墟上,四周的荒凉一望無際,忽然覺得,淒涼也很美
© 2005- 王朝網路 版權所有