Network Working Group J. Reynolds
Request for Comments: 961 J. Postel
ISI
Obsoletes: RFCs 944, 924, 901, 880, 840 December 1985
OFFICIAL ARPA-INTERNET PROTOCOLS
STATUS OF THIS MEMO
This memo is an official status report on the protocols used in the
ARPA-Internet community. Distribution of this memo is unlimited.
INTRODUCTION
This RFCidentifies the documents specifying the official protocols
used in the Internet. Comments indicate any revisions or changes
planned.
To first order, the official protocols are those in the "Internet
Protocol Transition Workbook" (IPTW) dated March 1982. There are
several protocols in use that are not in the IPTW. A few of the
protocols in the IPTW have been revised. Notably, the mail protocols
have been revised and issued as a volume titled "Internet Mail
Protocols" dated November 1982. Telnet and the most useful Telnet
options have been revised and issued as a volume titled "Internet
Telnet Protocol and Options" (ITP) dated June 1983. The File
Transfer Protocol has been revised most recently as RFC959 which is
not yet included in any collection. Some protocols have not been
revised for many years, these are found in the old "ARPANET Protocol
Handbook" (APH) dated January 1978. There is also a volume of
protocol related information called the "Internet Protocol
Implementers Guide" (IPIG) dated August 1982.
This document is organized as a sketchy outline. The entries are
protocols (e.g., Transmission Control Protocol). In each entry there
are notes on status, specification, comments, other references,
dependencies, and contact.
The STATUS is one of: required, recommended, elective, or
eXPerimental.
The SPECIFICATION identifies the protocol defining documents.
The COMMENTS describe any differences from the specification or
problems with the protocol.
The OTHER REFERENCES identify documents that comment on or expand
on the protocol.
Official ARPA-Internet Protocols RFC961
The DEPENDENCIES indicate what other protocols are called upon by
this protocol.
The CONTACT indicates a person who can answer questions about the
protocol.
In particular, the status may be:
required
- all hosts must implement the required protocol,
recommended
- all hosts are encouraged to implement the recommended
protocol,
elective
- hosts may implement or not the elective protocol,
experimental
- hosts should not implement the experimental protocol
unless they are participating in the experiment and have
coordinated their use of this protocol with the contact
person, and
none
- this is not a protocol.
For further information about protocols in general, please
contact:
Joyce Reynolds
USC - Information Sciences Institute
4676 Admiralty Way
Marina del Rey, California 90292-6695
Phone: (213) 822-1511
ARPA mail: JKREYNOLDS@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
OVERVIEW
Catenet Model ------------------------------------------------------
STATUS: None
SPECIFICATION: IEN 48 (in IPTW)
COMMENTS:
Gives an overview of the organization and principles of the
Internet.
Could be revised and expanded.
OTHER REFERENCES:
Leiner, B., Cole R., Postel, J., and D. Mills, "The DARPA
Protocol Suite", IEEE INFOCOM 85, Washington, D.C., March 1985.
Also in IEEE Communications Magazine, and as ISI/RS-85-153,
March 1985.
Postel, J., "Internetwork Applications Using the DARPA Protocol
Suite", IEEE INFOCOM 85, Washington, D.C., March 1985. Also in
IEEE Communications Magazine, and as ISI/RS-85-151, April 1985.
Padlipsky, M.A., "The Elements of Networking Style and other
Essays and Animadversions on the Art of Intercomputer
Networking", Prentice-Hall, New Jersey, 1985.
RFC871 - A Perspective on the ARPANET Reference Model
DEPENDENCIES:
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
NETWORK LEVEL
Internet Protocol --------------------------------------------- (IP)
STATUS: Required
SPECIFICATION: RFC791 (in IPTW)
COMMENTS:
This is the universal protocol of the Internet. This datagram
protocol provides the universal addressing of hosts in the
Internet.
A few minor problems have been noted in this document.
The most serious is a bit of confusion in the route options.
The route options have a pointer that indicates which octet of
the route is the next to be used. The confusion is between the
phrases "the pointer is relative to this option" and "the
smallest legal value for the pointer is 4". If you are
confused, forget about the relative part, the pointer begins
at 4.
Another important point is the alternate reassembly procedure
suggested in RFC815.
Some changes are in the works for the security option.
Note that ICMP is defined to be an integral part of IP. You
have not completed an implementation of IP if it does not
include ICMP.
OTHER REFERENCES:
RFC815 (in IPIG) - IP Datagram Reassembly Algorithms
RFC814 (in IPIG) - Names, Addresses, Ports, and Routes
RFC816 (in IPIG) - Fault Isolation and Recovery
RFC817 (in IPIG) - Modularity and Efficiency in Protocol
Implementation
MIL-STD-1777 - Military Standard Internet Protocol
RFC963 - Some Problems with the Specification of the Military
Standard Internet Protocol
Official ARPA-Internet Protocols RFC961
DEPENDENCIES:
CONTACT: Postel@USC-ISIB.ARPA
Internet Control Message Protocol --------------------------- (ICMP)
STATUS: Required
SPECIFICATION: RFC792 (in IPTW)
COMMENTS:
The control messages and error reports that go with the
Internet Protocol.
A few minor errors in the document have been noted.
Suggestions have been made for additional types of redirect
message and additional destination unreachable messages.
A proposal for two additional ICMP message types is made in
RFC950 "Internet Subnets", Address Mask Request (A1=17), and
Address Mask Reply (A2=18). The details of these ICMP types
are subject to change. Use of these ICMP types is
experimental.
Note that ICMP is defined to be an integral part of IP. You
have not completed an implementation of IP if it does not
include ICMP.
OTHER REFERENCES: RFC950
DEPENDENCIES: Internet Protocol
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
HOST LEVEL
User Datagram Protocol --------------------------------------- (UDP)
STATUS: Recommended
SPECIFICATION: RFC768 (in IPTW)
COMMENTS:
Provides a datagram service to applications. Adds port
addressing to the IP services.
The only change noted for the UDP specification is a minor
clarification that if in computing the checksum a padding octet
is used for the computation it is not transmitted or counted in
the length.
OTHER REFERENCES:
DEPENDENCIES: Internet Protocol
CONTACT: Postel@USC-ISIB.ARPA
Transmission Control Protocol -------------------------------- (TCP)
STATUS: Recommended
SPECIFICATION: RFC793 (in IPTW)
COMMENTS:
Provides reliable end-to-end data stream service.
Many comments and corrections have been received for the TCP
specification document. These are primarily document bugs
rather than protocol bugs.
Event Processing Section: There are many minor corrections and
clarifications needed in this section.
Push: There are still some phrases in the document that give a
"record mark" flavor to the push. These should be further
clarified. The push is not a record mark.
Urgent: Page 17 is wrong. The urgent pointer points to the
last octet of urgent data (not to the first octet of non-urgent
data).
Official ARPA-Internet Protocols RFC961
Listening Servers: Several comments have been received on
difficulties with contacting listening servers. There should
be some discussion of implementation issues for servers, and
some notes on alternative models of system and process
organization for servers.
Maximum Segment Size: The maximum segment size option should
be generalized and clarified. It can be used to either
increase or decrease the maximum segment size from the default.
The TCP Maximum Segment Size is the IP Maximum Datagram Size
minus forty. The default IP Maximum Datagram Size is 576. The
default TCP Maximum Segment Size is 536. For further
discussion, see RFC879.
Idle Connections: There have been questions about
automatically closing idle connections. Idle connections are
ok, and should not be closed. There are several cases where
idle connections arise, for example, in Telnet when a user is
thinking for a long time following a message from the server
computer before his next input. There is no TCP "probe"
mechanism, and none is needed.
Queued Receive Data on Closing: There are several points where
it is not clear from the description what to do about data
received by the TCP but not yet passed to the user,
particularly when the connection is being closed. In general,
the data is to be kept to give to the user if he does a RECV
call.
Out of Order Segments: The description says that segments that
arrive out of order, that is, are not exactly the next segment
to be processed, may be kept on hand. It should also point out
that there is a very large performance penalty for not doing
so.
User Time Out: This is the time out started on an open or send
call. If this user time out occurs the user should be
notified, but the connection should not be closed or the TCB
deleted. The user should explicitly ABORT the connection if he
wants to give up.
OTHER REFERENCES:
RFC813 (in IPIG) - Window and Acknowledgement Strategy in TCP
RFC814 (in IPIG) - Names, Addresses, Ports, and Routes
RFC816 (in IPIG) - Fault Isolation and Recovery
Official ARPA-Internet Protocols RFC961
RFC817 (in IPIG) - Modularity and Efficiency in Protocol
Implementation
RFC879 - TCP Maximum Segment Size
RFC889 - Internet Delay Experiments
RFC896 - TCP/IP Congestion Control
MIL-STD-1778 - Military Standard Transmission Control Protocol
RFC964 - Some Problems with the Specification of the Military
Standard Transmission Control Protocol
DEPENDENCIES: Internet Protocol
CONTACT: Postel@USC-ISIB.ARPA
Host Monitoring Protocol ------------------------------------- (HMP)
STATUS: Elective
SPECIFICATION: RFC869
COMMENTS:
This is a good tool for debugging protocol implementations in
remotely located computers.
This protocol is used to monitor Internet gateways and the
TACs.
OTHER REFERENCES:
DEPENDENCIES: Internet Protocol
CONTACT: Hinden@BBN-UNIX.ARPA
Official ARPA-Internet Protocols RFC961
Cross Net Debugger ------------------------------------------ (XNET)
STATUS: Elective
SPECIFICATION: IEN 158
COMMENTS:
A debugging protocol, allows debugger like Access to remote
systems.
This specification should be updated and reissued as an RFC.
OTHER REFERENCES: RFC643
DEPENDENCIES: Internet Protocol
CONTACT: Postel@USC-ISIB.ARPA
"Stub" Exterior Gateway Protocol ----------------------------- (EGP)
STATUS: Recommended for Gateways
SPECIFICATION: RFC888, RFC904
COMMENTS:
The protocol used between gateways of different administrations
to exchange routing information.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES: RFC827, RFC890
DEPENDENCIES: Internet Protocol
CONTACT: Mills@USC-ISID.ARPA
Official ARPA-Internet Protocols RFC961
Gateway Gateway Protocol ------------------------------------- (GGP)
STATUS: Experimental
SPECIFICATION: RFC823
COMMENTS:
The gateway protocol now used in the core gateways.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Internet Protocol
CONTACT:
Brescia@BBN-UNIX.ARPA
Multiplexing Protocol ---------------------------------------- (MUX)
STATUS: Experimental
SPECIFICATION: IEN 90
COMMENTS:
Defines a capability to combine several segments from different
higher level protocols in one IP datagram.
No current experiment in progress. There is some question as
to the extent to which the sharing this protocol envisions can
actually take place. Also, there are some issues about the
information captured in the multiplexing header being (a)
insufficient, or (b) over specific.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Internet Protocol
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Stream Protocol ----------------------------------------------- (ST)
STATUS: Experimental
SPECIFICATION: IEN 119
COMMENTS:
A gateway resource allocation protocol designed for use in
multihost real time applications.
The implementation of this protocol has evolved and may no
longer be consistent with this specification. The document
should be updated and issued as an RFC.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Internet Protocol
CONTACT: jwf@LL-EN.ARPA
Network Voice Protocol ------------------------------------ (NVP-II)
STATUS: Experimental
SPECIFICATION: ISI Internal Memo
COMMENTS:
Defines the procedures for real time voice conferencing.
The specification is an ISI Internal Memo which should be
updated and issued as an RFC.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES: RFC741
DEPENDENCIES: Internet Protocol, Stream Protocol
CONTACT: Casner@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Reliable Data Protocol --------------------------------------- (RDP)
STATUS: Experimental
SPECIFICATION: RFC908
COMMENTS:
This protocol is designed to efficiently support the bulk
transfer of data for such host monitoring and control
applications as loading/dumping and remote debugging. The
protocol is intended to be simple to implement but still be
efficient in environments where there may be long transmission
delays and loss or non-sequential delivery of message segments.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Internet Protocol
CONTACT: CWelles@BBN-UNIX.ARPA
Internet Reliable Transaction Protocol ---------------------- (IRTP)
STATUS: Experimental
SPECIFICATION: RFC938
COMMENTS:
This protocol is a transport level host to host protocol
designed for an internet environment. While the issues
discussed may not be directly relevant to the research problems
of the DARPA community, they may be interesting to a number of
researchers and implementors.
OTHER REFERENCES:
DEPENDENCIES: Internet Protocol
CONTACT: Trudy@ACC.ARPA
Official ARPA-Internet Protocols RFC961
APPLICATION LEVEL
Telnet Protocol ------------------------------------------- (TELNET)
STATUS: Recommended
SPECIFICATION: RFC854 (in "Internet Telnet Protocol and
Options")
COMMENTS:
The protocol for remote terminal access.
This has been revised since the IPTW. RFC764 in IPTW is now
obsolete.
OTHER REFERENCES:
MIL-STD-1782 - Telnet Protocol
DEPENDENCIES: Transmission Control Protocol
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Telnet Options ------------------------------------ (TELNET-OPTIONS)
STATUS: Elective
SPECIFICATION: General description of options: RFC855
(in "Internet Telnet Protocol and Options")
Number Name RFCNIC ITP APH USE
------ --------------------------------- --- ----- --- --- ---
0 Binary Transmission 856 ----- yes obs yes
1 Echo 857 ----- yes obs yes
2 Reconnection ... 15391 no yes no
3 Suppress Go Ahead 858 ----- yes obs yes
4 Approx Message Size Negotiation ... 15393 no yes no
5 Status 859 ----- yes obs yes
6 Timing Mark 860 ----- yes obs yes
7 Remote Controlled Trans and Echo 726 39237 no yes no
8 Output Line Width ... 20196 no yes no
9 Output Page Size ... 20197 no yes no
10 Output Carriage-Return Disposition 652 31155 no yes no
11 Output Horizontal Tabstops 653 31156 no yes no
12 Output Horizontal Tab Disposition 654 31157 no yes no
13 Output Formfeed Disposition 655 31158 no yes no
14 Output Vertical Tabstops 656 31159 no yes no
15 Output Vertical Tab Disposition 657 31160 no yes no
16 Output Linefeed Disposition 658 31161 no yes no
17 Extended ASCII 698 32964 no yes no
18 Logout 727 40025 no yes no
19 Byte Macro 735 42083 no yes no
20 Data Entry Terminal 732 41762 no yes no
21 SUPDUP 734 736 42213 no yes no
22 SUPDUP Output 749 45449 no no no
23 Send Location 779 ----- no no no
24 Terminal Type 930 ----- no no no
25 End of Record 885 ----- no no no
26 TACACS User Identification 927 ----- no no no
27 Output Marking 933 ----- no no no
28 Terminal Location Number 946 ----- no no no
255 Extended-Options-List 861 ----- yes obs yes
(obs = obsolete)
The ITP column indicates if the specification is included in the
Internet Telnet Protocol and Options. The APH column indicates if
the specification is included in the ARPANET Protocol Handbook.
The USE column of the table above indicates which options are in
general use.
Official ARPA-Internet Protocols RFC961
COMMENTS:
The Binary Transmission, Echo, Suppress Go Ahead, Status,
Timing Mark, and Extended Options List options have been
recently updated and reissued. These are the most frequently
implemented options.
The remaining options should be reviewed and the useful ones
should be revised and reissued. The others should be
eliminated.
The following are recommended: Binary Transmission, Echo,
Suppress Go Ahead, Status, Timing Mark, and Extended Options
List.
OTHER REFERENCES:
DEPENDENCIES: Telnet
CONTACT: Postel@USC-ISIB.ARPA
File Transfer Protocol --------------------------------------- (FTP)
STATUS: Recommended
SPECIFICATION: RFC959
COMMENTS:
The protocol for moving files between Internet hosts. Provides
for access control and negotiation of file parameters.
The following new optional commands are included in this
edition of the specification: Change to Parent Directory
(CDUP), Structure Mount (SMNT), Store Unique (STOU), Remove
Directory (RMD), Make Directory (MKD), Print Directory (PWD),
and System (SYST). Note that this specification is compatible
with the previous edition (RFC765).
OTHER REFERENCES:
RFC678 - Document File Format Standards
MIL-STD-1780 - File Transfer Protocol
DEPENDENCIES: Transmission Control Protocol
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Trivial File Transfer Protocol ------------------------------ (TFTP)
STATUS: Elective
SPECIFICATION: RFC783 (in IPTW)
COMMENTS:
A very simple file moving protocol, no access control is
provided.
This is in use in several local networks.
Ambiguities in the interpretation of several of the transfer
modes should be clarified, and additional transfer modes could
be defined. Additional error codes could be defined to more
clearly identify problems.
OTHER REFERENCES:
DEPENDENCIES: User Datagram Protocol
CONTACT: Postel@USC-ISIB.ARPA
Simple File Transfer Protocol ------------------------------- (SFTP)
STATUS: Experimental
SPECIFICATION: RFC913
COMMENTS:
SFTP is a simple file transfer protocol. It fills the need of
people wanting a protocol that is more useful than TFTP but
easier to implement (and less powerful) than FTP. SFTP
supports user access control, file transfers, directory
listing, directory changing, file renaming and deleting.
SFTP can be implemented with any reliable 8-bit byte stream
oriented protocol, this document describes its TCP
specification. SFTP uses only one TCP connection; whereas TFTP
implements a connection over UDP, and FTP uses two TCP
connections (one using the TELNET protocol).
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
Official ARPA-Internet Protocols RFC961
DEPENDENCIES: Transmission Control Protocol
CONTACT: MKL@SRI-NIC.ARPA
Simple Mail Transfer Protocol ------------------------------- (SMTP)
STATUS: Recommended
SPECIFICATION: RFC821 (in "Internet Mail Protocols")
COMMENTS:
The procedure for transmitting computer mail between hosts.
This has been revised since the IPTW, it is in the "Internet
Mail Protocols" volume of November 1982. RFC788 (in IPTW) is
obsolete.
There have been many misunderstandings and errors in the early
implementations. Some documentation of these problems can be
found in the file [ISIB]<SMTP>MAIL.ERRORS.
Some minor differences between RFC821 and RFC822 should be
resolved.
OTHER REFERENCES:
RFC822 - Mail Header Format Standards
This has been revised since the IPTW, it is in the "Internet
Mail Protocols" volume of November 1982. RFC733 (in IPTW)
is obsolete. Further revision of RFC822 is needed to
correct some minor errors in the details of the
specification.
MIL-STD-1781 - Simple Mail Transfer Protocol (SMTP)
DEPENDENCIES: Transmission Control Protocol
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Resource Location Protocol ----------------------------------- (RLP)
STATUS: Elective
SPECIFICATION: RFC887
COMMENTS:
A resource location protocol for use in the ARPA-Internet.
This protocol utilizes the User Datagram Protocol (UDP) which
in turn calls on the Internet Protocol to deliver its
datagrams.
OTHER REFERENCES:
DEPENDENCIES: User Datagram Protocol
CONTACT: Accetta@CMU-CS-A.ARPA
Loader Debugger Protocol ------------------------------------- (LDP)
STATUS: Experimental
SPECIFICATION: RFC909
COMMENTS:
Specifies a protocol for loading, dumping and debugging target
machines from hosts in a network environment. It is also
designed to accommodate a variety of target CPU types. It
provides a powerful set of debugging services, while at the
same time, it is structured so that a simple subset may be
implemented in applications like boot loading where efficiency
and space are at a premium.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Reliable Data Protocol
CONTACT: Hinden@BBN-UNIX.ARPA
Official ARPA-Internet Protocols RFC961
Remote Job Entry --------------------------------------------- (RJE)
STATUS: Elective
SPECIFICATION: RFC407 (in APH)
COMMENTS:
The general protocol for submitting batch jobs and retrieving
the results.
Some changes needed for use with TCP.
No known active implementations.
OTHER REFERENCES:
DEPENDENCIES: File Transfer Protocol
Transmission Control Protocol
CONTACT: Postel@USC-ISIB.ARPA
Remote Job Service ---------------------------------------- (NETRJS)
STATUS: Elective
SPECIFICATION: RFC740 (in APH)
COMMENTS:
A special protocol for submitting batch jobs and retrieving the
results used with the UCLA IBM OS system.
Please discuss any plans for implementation or use of this
protocol with the contact.
Revision in progress.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
CONTACT:
Braden@UCLA-CCN.ARPA
Official ARPA-Internet Protocols RFC961
Remote Telnet Service ------------------------------------ (RTELNET)
STATUS: Elective
SPECIFICATION: RFC818
COMMENTS:
Provides special access to user Telnet on a remote system.
OTHER REFERENCES:
DEPENDENCIES: Telnet, Transmission Control Protocol
CONTACT: Postel@USC-ISIB.ARPA
Graphics Protocol --------------------------------------- (GRAPHICS)
STATUS: Elective
SPECIFICATION: NIC 24308 (in APH)
COMMENTS:
The protocol for vector graphics.
Very minor changes needed for use with TCP.
No known active implementations.
OTHER REFERENCES:
DEPENDENCIES: Telnet, Transmission Control Protocol
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Echo Protocol ----------------------------------------------- (ECHO)
STATUS: Recommended
SPECIFICATION: RFC862
COMMENTS:
Debugging protocol, sends back whatever you send it.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
or User Datagram Protocol
CONTACT: Postel@USC-ISIB.ARPA
Discard Protocol ----------------------------------------- (DISCARD)
STATUS: Elective
SPECIFICATION: RFC863
COMMENTS:
Debugging protocol, throws away whatever you send it.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
or User Datagram Protocol
CONTACT: Postel@USC-ISIB.ARPA
Character Generator Protocol ----------------------------- (CHARGEN)
STATUS: Elective
SPECIFICATION: RFC864
COMMENTS:
Debugging protocol, sends you ASCII data.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
or User Datagram Protocol
Official ARPA-Internet Protocols RFC961
CONTACT: Postel@USC-ISIB.ARPA
Quote of the Day Protocol ---------------------------------- (QUOTE)
STATUS: Elective
SPECIFICATION: RFC865
COMMENTS:
Debugging protocol, sends you a short ASCII message.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
or User Datagram Protocol
CONTACT: Postel@USC-ISIB.ARPA
Active Users Protocol -------------------------------------- (USERS)
STATUS: Elective
SPECIFICATION: RFC866
COMMENTS:
Lists the currently active users.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
or User Datagram Protocol
CONTACT: Postel@USC-ISIB.ARPA
Finger Protocol ------------------------------------------- (FINGER)
STATUS: Elective
SPECIFICATION: RFC742 (in APH)
COMMENTS:
Provides information on the current or most recent activity of
a user.
Some extensions have been suggested.
Official ARPA-Internet Protocols RFC961
Some changes are are needed for TCP.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
CONTACT: Postel@USC-ISIB.ARPA
WhoIs Protocol ------------------------------------------- (NICNAME)
STATUS: Elective
SPECIFICATION: RFC954
COMMENTS:
Accesses the ARPANET Directory database. Provides a way to
find out about people, their addresses, phone numbers,
organizations, and mailboxes.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
CONTACT: Feinler@SRI-NIC.ARPA
Domain Name Protocol -------------------------------------- (DOMAIN)
STATUS: Recommended
SPECIFICATION: RFC881, 882, 883
COMMENTS:
OTHER REFERENCES:
RFC920 - Domain Requirements
RFC921 - Domain Name Implementation Schedule - Revised
DEPENDENCIES: Transmission Control Protocol
or User Datagram Protocol
CONTACT: Mockapetris@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
HOSTNAME Protocol --------------------------------------- (HOSTNAME)
STATUS: Elective
SPECIFICATION: RFC953
COMMENTS:
Accesses the Registered Internet Hosts database (HOSTS.TXT).
Provides a way to find out about a host in the Internet, its
Internet Address, and the protocols it implements.
OTHER REFERENCES:
RFC952 - Host Table Specification
DEPENDENCIES: Transmission Control Protocol
CONTACT: Feinler@SRI-NIC.ARPA
Host Name Server Protocol ----------------------------- (NAMESERVER)
STATUS: Experimental
SPECIFICATION: IEN 116 (in IPTW)
COMMENTS:
Provides machine oriented procedure for translating a host name
to an Internet Address.
This specification has significant problems: 1) The name
syntax is out of date. 2) The protocol details are ambiguous,
in particular, the length octet either does or doesn't include
itself and the op code. 3) The extensions are not supported by
any known implementation.
This protocol is now abandoned in favor of the DOMAIN protocol.
Further implementations of this protocol are not advised.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: User Datagram Protocol
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
CSNET Mailbox Name Server Protocol ---------------------- (CSNET-NS)
STATUS: Experimental
SPECIFICATION: CS-DN-2
COMMENTS:
Provides access to the CSNET data base of users to give
information about users names, affiliations, and mailboxes.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
CONTACT: Solomon@UWISC.ARPA
Daytime Protocol ----------------------------------------- (DAYTIME)
STATUS: Elective
SPECIFICATION: RFC867
COMMENTS:
Provides the day and time in ASCII character string.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
or User Datagram Protocol
CONTACT: Postel@USC-ISIB.ARPA
Network Time Protocol ---------------------------------------- (NTP)
STATUS: Experimental
SPECIFICATION: RFC958
COMMENTS:
A proposed protocol for synchronizing a set of network clocks
using a set of distributed clients and servers.
Official ARPA-Internet Protocols RFC961
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES: RFC778, RFC891, RFC956, and RFC957.
DEPENDENCIES: User Datagram Protocol
CONTACT: Mills@USC-ISID.ARPA
Time Server Protocol ---------------------------------------- (TIME)
STATUS: Elective
SPECIFICATION: RFC868
COMMENTS:
Provides the time as the number of seconds from a specified
reference time.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
or User Datagram Protocol
CONTACT: Postel@USC-ISIB.ARPA
DCNET Time Server Protocol --------------------------------- (CLOCK)
STATUS: Experimental
SPECIFICATION: RFC778
COMMENTS:
Provides a mechanism for keeping synchronized clocks.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Internet Control Message Protocol
CONTACT: Mills@USC-ISID.ARPA
Official ARPA-Internet Protocols RFC961
SUPDUP Protocol ------------------------------------------- (SUPDUP)
STATUS: Elective
SPECIFICATION: RFC734 (in APH)
COMMENTS:
A special Telnet like protocol for display terminals.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
CONTACT: Crispin@SU-SCORE.ARPA
Internet Message Protocol ------------------------------------ (MPM)
STATUS: Experimental
SPECIFICATION: RFC759
COMMENTS:
This is an experimental multimedia mail transfer protocol. The
implementation is called a Message Processing Module or MPM.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
RFC767 - Structured Document Formats
DEPENDENCIES: Transmission Control Protocol
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Post Office Protocol - Version 2 ---------------------------- (POP2)
STATUS: Experimental
SPECIFICATION: RFC937
COMMENTS:
The intent of the Post Office Protocol - Version 2 (POP2) is to
allow a user's workstation to access mail from a mailbox
server. It is expected that mail will be posted from the
workstation to the mailbox server via the Simple Mail Transfer
Protocol (SMTP).
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES: Obsoletes RFC918
DEPENDENCIES: Transmission Control Protocol
CONTACT: JKReynolds@USC-ISIB.ARPA
Network Standard Text Editor ------------------------------- (NETED)
STATUS: Elective
SPECIFICATION: RFC569
COMMENTS:
Describes a simple line editor which could be provided by every
Internet host.
OTHER REFERENCES:
DEPENDENCIES:
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Authentication Service -------------------------------------- (AUTH)
STATUS: Experimental
SPECIFICATION: RFC931
COMMENTS:
This server provides a means to determine the identity of a
user of a particular TCP connection. Given a TCP port number
pair, it returns a character string which identifies the owner
of that connection on the server's system.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES: Supercedes RFC912
DEPENDENCIES: Transmission Control Protocol
CONTACT: StJohns@MIT-Multics.ARPA
Bootstrap Protocol ----------------------------------------- (BOOTP)
STATUS: Experimental
SPECIFICATION: RFC951
COMMENTS:
This proposed protocol provides an IP/UDP bootstrap protocol
which allows a diskless client machine to discover its own IP
address, the address of a server host, and the name of a file
to be loaded into memory and executed.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Internet Protocol, User Datagram Protocol
CONTACT: Croft@SUMEX-AIM.ARPA
Official ARPA-Internet Protocols RFC961
APPENDICES
Assigned Numbers ---------------------------------------------------
STATUS: None
SPECIFICATION: RFC960
COMMENTS:
Describes the fields of various protocols that are assigned
specific values for actual use, and lists the currently
assigned values.
Issued November 1985, replaces RFC943, RFC790 in IPTW, and
RFC923.
OTHER REFERENCES:
CONTACT: JKReynolds@USC-ISIB.ARPA
Pre-emption --------------------------------------------------------
STATUS: Elective
SPECIFICATION: RFC794 (in IPTW)
COMMENTS:
Describes how to do pre-emption of TCP connections.
OTHER REFERENCES:
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Service Mappings ---------------------------------------------------
STATUS: None
SPECIFICATION: RFC795 (in IPTW)
COMMENTS:
Describes the mapping of the IP type of service field onto the
parameters of some specific networks.
Out of date, needs revision.
OTHER REFERENCES:
CONTACT: Postel@USC-ISIB.ARPA
Address Mappings ---------------------------------------------------
STATUS: None
SPECIFICATION: RFC796 (in IPTW)
COMMENTS:
Describes the mapping between Internet Addresses and the
addresses of some specific networks.
Out of date, needs revision.
OTHER REFERENCES:
CONTACT: Postel@USC-ISIB.ARPA
Document Formats ---------------------------------------------------
STATUS: None
SPECIFICATION: RFC678
COMMENTS:
Describes standard format rules for several types of documents.
OTHER REFERENCES:
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Bitmap Formats -----------------------------------------------------
STATUS: None
SPECIFICATION: RFC797
COMMENTS:
Describes a standard format for bitmap data.
OTHER REFERENCES:
CONTACT: Postel@USC-ISIB.ARPA
Facsimile Formats --------------------------------------------------
STATUS: None
SPECIFICATION: RFC804
COMMENTS:
Describes a standard format for facsimile data.
OTHER REFERENCES:
CONTACT: Postel@USC-ISIB.ARPA
Host-Front End Protocol ------------------------------------- (HFEP)
STATUS: Experimental
SPECIFICATION: RFC929
COMMENTS:
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES: RFC928
DEPENDENCIES:
CONTACT: Padlipsky@USC-ISI.ARPA
Official ARPA-Internet Protocols RFC961
Internet Protocol on X.25 Networks ------------------------ (IP-X25)
STATUS: Recommended
SPECIFICATION: RFC877
COMMENTS:
Describes a standard for the transmission of IP Datagrams over
Public Data Networks.
OTHER REFERENCES:
CONTACT: jtk@PURDUE.ARPA
Internet Protocol on DC Networks --------------------------- (IP-DC)
STATUS: Elective
SPECIFICATION: RFC891
COMMENTS:
OTHER REFERENCES:
RFC778 - DCNET Internet Clock Service
CONTACT: Mills@USC-ISID.ARPA
Internet Protocol on Ethernet Networks ---------------------- (IP-E)
STATUS: Recommended
SPECIFICATION: RFC894
COMMENTS:
OTHER REFERENCES: RFC893
CONTACT: Postel@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Internet Protocol on Experimental Ethernet Networks -------- (IP-EE)
STATUS: Recommended
SPECIFICATION: RFC895
COMMENTS:
OTHER REFERENCES:
CONTACT: Postel@USC-ISIB.ARPA
Internet Protocol on IEEE 802.3 -------------------------- (IP-IEEE)
STATUS: Recommended
SPECIFICATION: RFC948
COMMENTS: A proposed protocol of two methods of encapsulating
Internet Protocol (IP) datagrams on an IEEE 802.3 network.
OTHER REFERENCES:
CONTACT: Ira@UPENN.CSNET
Internet Subnet Protocol ---------------------------------- (IP-SUB)
STATUS: Recommended
SPECIFICATION: RFC950
COMMENTS:
Specifies procedures for the use of subnets, including the
ultility of "subnets" of Internet networks, which are logically
visible sub-sections of a single Internet. Recommended in the
sense of "if you do subnetting at all do it this way".
OTHER REFERENCES: RFC940, RFC917, RFC925, RFC932, RFC936,
RFC922
DEPENDENCIES:
CONTACT: Mogul@SU-SCORE.ARPA
Official ARPA-Internet Protocols RFC961
Broadcasting Internet Datagrams ------------------------- (IP-BROAD)
STATUS: Experimental
SPECIFICATION: RFC919
COMMENTS:
A proposed protocol of simple rules for broadcasting Internet
datagrams on local networks that support broadcast, for
addressing broadcasts, and for how gateways should handle them.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES: RFC922
DEPENDENCIES:
CONTACT: Mogul@SU-SCORE.ARPA
Address Resolution Protocol ---------------------------------- (ARP)
STATUS: Recommended
SPECIFICATION: RFC826
COMMENTS:
This is a procedure for finding the network hardware address
corresponding to an Internet Address.
OTHER REFERENCES:
CONTACT: Postel@USC-ISIB.ARPA
A Reverse Address Resolution Protocol ----------------------- (RARP)
STATUS: Elective
SPECIFICATION: RFC903
COMMENTS:
This is a procedure for workstations to dynamically find their
protocol address (e.g., their Internet Address), when they only
only know their hardware address (e.g., their attached physical
network address).
Official ARPA-Internet Protocols RFC961
OTHER REFERENCES:
CONTACT: Mogul@SU-SCORE.ARPA
Multi-LAN Address Resolution Protocol ----------------------- (MARP)
STATUS: Experimental
SPECIFICATION: RFC925
COMMENTS:
Discussion of the various problems and potential solutions of
"transparent subnets" in a multi-LAN environment.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES: RFC917, RFC826
DEPENDENCIES:
CONTACT: Postel@USC-ISIB.ARPA
Broadcasting Internet Datagrams with Subnets --------- (IP-SUB-BROAD)
STATUS: Experimental
SPECIFICATION: RFC922
COMMENTS:
A proposed protocol of simple rules for broadcasting Internet
datagrams on local networks that support broadcast, for
addressing broadcasts, and for how gateways should handle them.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES:
CONTACT: Mogul@SU-SCORE.ARPA
Official ARPA-Internet Protocols RFC961
Host Access Protocol ----------------------------------------- (HAP)
STATUS: Recommended
SPECIFICATION: RFC907
COMMENTS:
This protocol specifies the network-access level communication
between an arbitrary computer, called a host, and a
packet-switched satellite network, e.g., SATNET or WBNET.
Note: Implementations of HAP should be performed in
coordination with satellite network development and operations
personnel.
OTHER REFERENCES:
DEPENDENCIES:
CONTACT: Schoen@BBN-UNIX.ARPA
Reliable Asynchronous Transfer Protocol --------------------- (RATP)
STATUS: Experimental
SPECIFICATION: RFC916
COMMENTS:
This paper specifies a protocol which allows two programs to
reliably communicate over a communication link. It ensures
that the data entering one end of the link if received arrives
at the other end intact and unaltered. This proposed protocol
is designed to operate over a full duplex point-to-point
connection. It contains some features which tailor it to the
RS-232 links now in current use.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES: Transmission Control Protocol
CONTACT: Finn@USC-ISIB.ARPA
Official ARPA-Internet Protocols RFC961
Thinwire Protocol --------------------------------------- (THINWIRE)
STATUS: Experimental
SPECIFICATION: RFC914
COMMENTS:
This paper discusses a Thinwire Protocol for connecting
personal computers to the ARPA-Internet. It primarily focuses
on the particular problems in the ARPA-Internet of low speed
network interconnection with personal computers, and possible
methods of solution.
Please discuss any plans for implementation or use of this
protocol with the contact.
OTHER REFERENCES:
DEPENDENCIES:
CONTACT: Farber@ROCHESTER.ARPA
