# Function : add_resource
# ~~~~~~~~~~~~~~~~~~~~~~~
function add_resource (pblkres, newpid) {
if (index(pblkres, newpid))
return pblkres;
else
return pblkres " " newpid;
}
# Function : sameseq
# ~~~~~~~~~~~~~~~~~~
function sameseq(ev1, ev2, seq1, seq2) {
#printf("sameseq: Comparing :\n");
#printf("Ev=(%s) seq=(%s)\n", ev1, seq1);
#printf("against Ev=(%s) seq=(%s)\n", ev2, seq2);
if (!seq1) return 0;
if (seq1 != seq2) return 0;
if (ev1 != ev2) return 0;
if (ev1 ~ "'rdbms ipc message'"
ev1 ~ "'smon timer'"
ev1 ~ "'pmon timer'")
return 0;
return 1;
}
# Function : min
# ~~~~~~~~~~~~~~
function min(one, two) {
return (one }
# Function: procevent
# ~~~~~~~~~~~~~~~~~~~
function procevent (str) {
if (!eventdetail) return str;
realev = str;
sub("^.* for ", "", str);
sub("holding ", "", str);
sub("acquiring ", "", str);
#printf("DBG String = '%s'\n", str);
if (str == "'db file sequential read'"str == "'db file scattered read'"
str == "'db file parallel write'" str == "'db file sequential write'"
str == "'buffer busy waits'" str == "'free buffer waits'"
str == "'buffer deadlock'" str == "'parallel query qref latch'")
{
getline; sub("
",""); gsub("="," ");
realev = realev " (" $2 $4 $6 ")";
}
else if (str == "'pipe get'")
{
getline; sub("
","");
realev = realev " (" $2 ")";
}
else if (str == "'parallel query dequeue wait'")
{
getline; sub("
","");
gsub("="," ");
realev = realev " (" $2 $4 $6 ")";
print_pqo = 1;
}
else if (str == "'enqueue'" "'DFS lock acquisition'")
{
getline; sub("
",""); gsub("="," ");
# For now let's not do anything too clever !
if (substr($2, 1, 4) == "5351")# SQ - sequence
realev = realev " (SQ(sequence) id=" $4 ")";
else if (substr($2, 1, 4) == "5356")# SV - sequence
realev = realev " (SV(sequence) id=" $4 ")";
############################################
### The following tends to crowd the output.
############################################
#else
# realev = realev " (" $2 $4 $6 ")";
}
return realev;
}
# Function: pq_details
# ~~~~~~~~~~~~~~~~~~~~
function pq_details(rversion)
{
split(rversion, _ver, ".");
printf("\nAdditional Note:\n~~~~~~~~~~~~~~~~\n");
printf(" A 'parallel query dequeue' wait event has been encountered. The\n");
printf("arguments to this wait event are described below :\n\n");
if (_ver[2] < 2)
{
printf(" Parameter 1 - Process Queue to Dequeue\n");
}
else
{
#Reasons can be seen in the fixed table X$KXFPSDS.
printf(" Parameter 1 - Reason for Dequeue. One of (Based upon 7.2.x) :\n");
printf("0x01 - QC waiting for reply from Slaves for Parallel Recovery\n");
printf("0x02 - Slave Dequeueing for Parallel Recovery\n");
printf("0x03 - Waiting for the Join Group Message from new KXFP client\n");
printf("0x04 - QC dequeueing from Slaves after starting a Server Group\n");
printf("0x05 - Dequeueing a credit only\n");
printf("0x06 - Dequeueing to free up a NULL buffer\n");
printf("0x07 - Dequeueing to get the credit so that we can enqueue\n");
printf("0x08 - Testing for dequeue\n");
printf("0x09 - Slave is waiting to dequeue a message fragment from QC\n");
printf("0x0a - QC waiting for Slaves to parse SQL and return OK\n");
printf("0x0b - QC waiting to dequeue (execution reply) msg from slave\n");
printf("0x0c - QC waiting to dequeue (execution) msg from slave\n");
printf("0x0d - We are dequeueing a message (range partitioned)\n");
printf("0x0e - We are dequeueing samples (consumer) from the QC\n");
printf("0x0f - We are dequeueing a message (ordered)\n");
printf("0x10 - Range TQ prodUCer and are waiting to dequeue\n");
printf("0x11 - Consumer waiting to dequeue prior to closing TQ\n");
}
printf(" Parameter 2 - Sleep Time/Sender Id\n");
printf(" Time to sleep in 1/100ths of a second\n");
printf(" If sleeptime greater than 0x10000000, the lower sixteen bits\n");
printf(" indicate the slave number on the remote instance indicated by\n");
printf(" the higher sixteen bits of the first 32 bits.\n");
printf(" Parameter 3 - Number of passes through the dequeueing code\n\n");
printf(" (This information assumes the trace file has a version number in the header)\n");
return 0;
}
# Function: pq_qc2slave
# ~~~~~~~~~~~~~~~~~~~~~
#
# Note: If the following line is added in then the awk script causes awk to
# CORE dump under HP and AIX. The line is designed to make variables have
# local scope but unfortunately it cannot be used here.
#function pq_qc2slave(state_no ,_tmp,_temp,_qcarr,_i,_j,_k,_qc,_slaveid)
function pq_qc2slave(state_no)
{
if (!
(_qc = split(qclist[state_no], _qcarr, " ")))
return;
printf("\nQuery Co-Ordinator to Query Slave Mapping\n");
printf("~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n");
## TODO: Add a Receiving/Sending message at end of line to denote what we are
## up to.
#o Make use of PS enqueues(PS-instance-slave) (Output them in QC dump ?)
for (_i=1; _i<=_qc; _i++)
{
printf("QC=%5s[Count=%s]\n", _qcarr[_i], qc_cnt[state_no, _qcarr[_i]]-1);
for (_j=0; _j {
split(pqenq[_qcarr[_i], _j], _pqtmp, "-");
printf("%10s Communicates with Slave %d (hex) on instance %d (%s)\n"," ",
_pqtmp[3], _pqtmp[2], pqenq[_qcarr[_i], _j]);
}
printf("%5s %8s %3s %8s %11s %11s %5s %7s %8s %4s\n",
"Slave", "Info", "Msg", "State", "From", "To",
"Type", "Status", "Mode","Err");
for (_j=qc_cnt[state_no, _qcarr[_i]]-1; _j0; _j--)
{
_temp = qc[state_no, _qcarr[_i], _j];
_slaveid = slave[state_no, _temp];
#printf("DBG: Slaveid = slave[sstate=%d, qref=%s]\n", state_no, _temp);
_printed = 0;
for (_k=0; _k<2; _k++)
{
_msg = pqdetail[state_no, _slaveid, _k];
if (!_msg) continue;
split(_msg, _tmp, " ");
printf("%5s %8s %3d %8s %11s %11s %5s %7s %8s %4s\n",
_printed?" ":_slaveid, pqenq[_slaveid, 0], _k, _tmp[1],
slave[state_no,_tmp[2]]?slave[state_no, _tmp[2]]:_tmp[2],
slave[state_no,_tmp[3]]?slave[state_no, _tmp[3]]:_tmp[3],
_tmp[4], _tmp[5], _tmp[6], _tmp[7]);
#printf("DBG: From = slave[sstate=%d, qref=%s]\n", state_no, _tmp[2]);
#printf("DBG: To = slave[sstate=%d, qref=%s]\n", state_no, _tmp[3]);
_printed = 1;
}
}
}
printf("%*s------------------------\n", 25, " ");
printf("STATUS Key:\n");
printf("DEQ = buffer has been dequeued\n");
printf("EML = buffer on emergency message list\n");
printf("ENQ = buffer has been enqueued\n");
printf("FLST= buffer is on SGA freelist\n");
printf("FRE = buffer is free (unused)\n");
printf("GEB = buffer has been gotten for enqueuing\n");
printf("GDB = dequeued buffer has been gotten \n");
printf("INV = buffer is invalid (non-existent)\n");
printf("QUE = buffer on queue message list\n");
printf("RCV = buffer has been received \n");
printf("NOFL= not on freelist (just removed)\n");
printf("%*s------------------------\n", 30, " ");
#KXFPMTYINV0 - Invalid message (new buffer). [INV]
#KXFPMTYNUL1 - Null message, used to send credit.[NUL]
#KXFPMTYJOI2 - Join group, from QC to slaves.[JOI]
#KXFPMTYERR3 - Exiting group from slave to QC. [ERR]
#KXFPMTYRQS4 - Request for statistics, QC to slaves. [RQS]
#KXFPMTYSTA5 - Statistics update,
slaves to QC.[STA]
#KXFPMTYDTA6 - User data, stuff kxfp doesn't look at.[DTA]
#KXFPMTYJVR7 - Slave to QC, ack and version number.
#KXFPHSTRE :0x01 - Stream mode, return credit immediately.[STRE]
#KXFPHDIAL :0x02 - Dialog mode, eXPect a reply message. [DIAL]
#KXFPHNPNG :0x04 - No pings, error if next message pings. [NPNG]
#KXFPMHPRI :0x08 - Priority (JOInERRorEXIt) message. [PRI]
#KXFPMHSTP :0x10 - Stream ping message. @@ [STP]
#KXFPMHNDS :0x20 - Non-default sized buffer. [NDS]
#KXFPMHCLR :0x40 - Sent from a clear qref. [CLR]
#KXFPMHNID :0x80 - No implicit dequeue.[NID]
}