分享
 
 
 

Effective C++: Item 10

王朝vc·作者佚名  2006-01-08
窄屏简体版  字體: |||超大  

依myan的网址,找到了些资料,故而贴出来,以方便大家!

Item 10: Write operator delete if you write operator new.Let's step back for a moment and return to fundamentals. Why would anybody want to write their own version of operator new or operator delete in the first place?

More often than not, the answer is efficiency. The default versions of operator new and operator delete are perfectly adequate for general-purpose use, but their flexibility inevitably leaves room for improvements in their performance in a more circumscribed context. This is especially true for applications that dynamically allocate a large number of small objects.

As an example, consider a class for representing airplanes, where the Airplane class contains only a pointer to the actual representation for airplane objects (a technique discussed in Item 34):

class AirplaneRep { ... }; // representation for an

// Airplane object

class Airplane {

public:

...

private:

AirplaneRep *rep; // pointer to representation

};

An Airplane object is not very big; it contains but a single pointer. (As explained in Item 14, it may implicitly contain a second pointer if the Airplane class declares virtual functions.) When you allocate an Airplane object by calling operator new, however, you probably get back much more memory than is needed to store this pointer (or pair of pointers). The reason for this seemingly wayward behavior has to do with the need for operator new and operator delete to communicate with one another.

Because the default version of operator new is a general-purpose allocator, it must be prepared to allocate blocks of any size. Similarly, the default version of operator delete must be prepared to deallocate blocks of whatever size operator new allocated. For operator delete to know how much memory to deallocate, it must have some way of knowing how much memory operator new allocated in the first place. A common way for operator new to tell operator delete how much memory it allocated is by prepending to the memory it returns some additional data that specifies the size of the allocated block. That is, when you say this,

Airplane *pa = new Airplane;

you don't necessarily get back a block of memory that looks like this:

Instead, you often get back a block of memory that looks more like this:

For small objects like those of class Airplane, this additional bookkeeping data can more than double the amount of memory needed for each dynamically allocated object (especially if the class contains no virtual functions).

If you're developing software for an environment in which memory is precious, you may not be able to afford this kind of spendthrift allocation. By writing your own operator new for the Airplane class, you can take advantage of the fact that all Airplane objects are the same size, so there isn't any need for bookkeeping information to be kept with each allocated block.

One way to implement your class-specific operator new is to ask the default operator new for big blocks of raw memory, each block of sufficient size to hold a large number of Airplane objects. The memory chunks for Airplane objects themselves will be taken from these big blocks. Currently unused chunks will be organized into a linked list -- the free list -- of chunks that are available for future Airplane use. This may make it sound like you'll have to pay for the overhead of a next field in every object (to support the list), but you won't: the space for the rep field (which is necessary only for memory chunks in use as Airplane objects) will also serve as the place to store the next pointer (because that pointer is needed only for chunks of memory not in use as Airplane objects). You'll arrange for this job-sharing in the usual fashion: you'll use a union.

To turn this design into reality, you have to modify the definition of Airplane to support custom memory management. You do it as follows:

class Airplane { // modified class -- now supports

public: // custom memory management

static void * operator new(size_t size);

...

private:

union {

AirplaneRep *rep; // for objects in use

Airplane *next; // for objects on free list

};

// this class-specific constant (see Item 1) specifies how

// many Airplane objects fit into a big memory block;

// it's initialized below

static const int BLOCK_SIZE;

static Airplane *headOfFreeList;

};

Here you've added the declarations for operator new, the union that allows the rep and next fields to occupy the same memory, a class-specific constant for specifying how big each allocated block should be, and a static pointer to keep track of the head of the free list. It's important to use a static member for this last task, because there's one free list for the entire class, not one free list for each Airplane object.

The next thing to do is to write the new operator new:

void * Airplane::operator new(size_t size)

{

// send requests of the "wrong" size to ::operator new();

// for details, see Item 8

if (size != sizeof(Airplane))

return ::operator new(size);

Airplane *p = // p is now a pointer to the

headOfFreeList; // head of the free list

// if p is valid, just move the list head to the

// next element in the free list

if (p)

headOfFreeList = p->next;

else {

// The free list is empty. Allocate a block of memory

// big enough hold BLOCK_SIZE Airplane objects

Airplane *newBlock =

static_cast<Airplane*>(::operator new(BLOCK_SIZE *

sizeof(Airplane)));

// form a new free list by linking the memory chunks

// together; skip the zeroth element, because you'll

// return that to the caller of operator new

for (int i = 1; i < BLOCK_SIZE-1; ++i)

newBlock[i].next = &newBlock[i+1];

// terminate the linked list with a null pointer

newBlock[BLOCK_SIZE-1].next = 0;

// set p to front of list, headOfFreeList to

// chunk immediately following

p = newBlock;

headOfFreeList = &newBlock[1];

}

return p;

}

If you've read Item 8, you know that when operator new can't satisfy a request for memory, it's supposed to perform a series of ritualistic steps involving new-handler functions and exceptions. There is no sign of such steps above. That's because this operator new gets all the memory it manages from ::operator new. That means this operator new can fail only if ::operator new does. But if ::operator new fails, it must engage in the new-handling ritual (possibly culminating in the throwing of an exception), so there is no need for Airplane's operator new to do it, too. In other words, the new-handler behavior is there, you just don't see it, because it's hidden inside ::operator new.

Given this operator new, the only thing left to do is provide the obligatory definitions of Airplane's static data members:

Airplane *Airplane::headOfFreeList; // these definitions

// go in an implemen-

const int Airplane::BLOCK_SIZE = 512; // tation file, not

// a header file

There's no need to explicitly set headOfFreeList to the null pointer, because static members are initialized to 0 by default. The value for BLOCK_SIZE, of course, determines the size of each memory block we get from ::operator new.

This version of operator new will work just fine. Not only will it use a lot less memory for Airplane objects than the default operator new, it's also likely to be faster, possibly as much as two orders of magnitude faster. That shouldn't be surprising. After all, the general version of operator new has to cope with memory requests of different sizes, has to worry about internal and external fragmentation, etc., whereas your version of operator new just manipulates a couple of pointers in a linked list. It's easy to be fast when you don't have to be flexible.

At long last we are in a position to discuss operator delete. Remember operator delete? This Item is about operator delete. As currently written, your Airplane class declares operator new, but it does not declare operator delete. Now consider what happens when a client writes the following, which is nothing if not eminently reasonable:

Airplane *pa = new Airplane; // calls

// Airplane::operator new

...

delete pa; // calls ::operator delete

If you listen closely when you read this code, you can hear the sound of an airplane crashing and burning, with much weeping and wailing by the programmers who knew it. The problem is that operator new (the one defined in Airplane) returns a pointer to memory without any header information, but operator delete (the default, global one) assumes that the memory it's passed does contain header information! Surely this is a recipe for disaster.

This example illustrates the general rule: operator new and operator delete must be written in concert so that they share the same assumptions. If you're going to roll your own memory allocation routine, be sure to roll one for deallocation, too.

Here's how you solve the problem with the Airplane class:

class Airplane { // same as before, except there's

public: // now a decl. for operator delete

...

static void operator delete(void *deadObject,

size_t size);

};

// operator delete is passed a memory chunk, which,

// if it's the right size, is just added to the

// front of the list of free chunks

void Airplane::operator delete(void *deadObject,

size_t size)

{

if (deadObject == 0) return; // see Item 8

if (size != sizeof(Airplane)) { // see Item 8

::operator delete(deadObject);

return;

}

Airplane *carcass = static_cast<Airplane*>(deadObject);

carcass->next = headOfFreeList;

headOfFreeList = carcass;

}

Because you were careful in operator new to ensure that calls of the "wrong" size were forwarded to the global operator new (see Item 8), you must demonstrate equal care in ensuring that such "improperly sized" objects are handled by the global version of operator delete. If you did not, you'd run into precisely the problem you have been laboring so arduously to avoid -- a semantic mismatch between new and delete.

Interestingly, the size_t value C++ passes to operator delete may be incorrect if the object being deleted was derived from a base class lacking a virtual destructor. This is reason enough for making sure your base classes have virtual destructors, but Item 14 describes a second, arguably better reason. For now, simply note that if you omit virtual destructors in base classes, operator delete functions may not work correctly.

All of which is well and good, but I can tell by the furrow in your brow that what you're really concerned about is the memory leak. With all the software development experience you bring to the table, there's no way you'd fail to notice that Airplane's operator new calls ::operator new to get big blocks of memory, but Airplane's operator delete fails to release those blocks.Memory leak! Memory leak! I can almost hear the alarm bells going off in your head.

Listen to me carefully: there is no memory leak.

A memory leak arises when memory is allocated, then all pointers to that memory are lost. Absent garbage collection or some other extralinguistic mechanism, such memory cannot be reclaimed. But this design has no memory leak, because it's never the case that all pointers to memory are lost. Each big block of memory is first broken down into Airplane-sized chunks, and these chunks are then placed on the free list. When clients call Airplane::operator new, chunks are removed from the free list, and clients receive pointers to them. When clients call operator delete, the chunks are put back on the free list. With this design, all memory chunks are either in use as Airplane objects (in which case it's the clients' responsibility to avoid leaking their memory) or are on the free list (in which case there's a pointer to the memory). There is no memory leak.

Nevertheless, the blocks of memory returned by ::operator new are never released by Airplane::operator delete, and there has to be some name for that. There is. You've created a memory pool. Call it semantic gymnastics if you must, but there is an important difference between a memory leak and a memory pool. A memory leak may grow indefinitely, even if clients are well-behaved, but a memory pool never grows larger than the maximum amount of memory requested by its clients.

It would not be difficult to modify Airplane's memory management routines so that the blocks of memory returned by ::operator new were automatically released when they were no longer in use, but there are two reasons why you might not want to do it.

The first concerns your likely motivation for tackling custom memory management. There are many reasons why you might do it, but the most common one is that you've determined that the default operator new and operator delete use too much memory or are too slow (or both). That being the case, every additional byte and every additional statement you devote to tracking and releasing those big memory blocks comes straight off the bottom line: your software runs slower and uses more memory than it would if you adopted the pool strategy. For libraries and applications in which performance is at a premium and you can expect pool sizes to be reasonably bounded, the pool approach may well be best.

The second reason has to do with pathological behavior. Suppose Airplane's memory management routines are modified so Airplane's operator delete releases any big block of memory that has no active objects in it. Now consider this program:

int main()

{

Airplane *pa = new Airplane; // first allocation: get big

// block, make free list, etc.

delete pa; // block is now empty;

// release it

pa = new Airplane; // uh oh, get block again,

// make free list, etc.

delete pa; // okay, block is empty

// again; release it

... // you get the idea...

return 0;

}

This nasty little program will run slower and use more memory than with even the default operator new and operator delete, much less the pool-based versions of those functions!

Of course, there are ways to deal with this pathology, but the more you code for uncommon special cases, the closer you get to reimplementing the default memory management functions, and then what have you gained? A memory pool is not the answer to all memory management questions, but it's a reasonable answer to many of them.

In fact, it's a reasonable answer often enough that you may be bothered by the need to reimplement it for different classes. "Surely," you think to yourself, "there should be a way to package the notion of a fixed-sized memory allocator so it's easily reused." There is, though this Item has droned on long enough that I'll leave the details in the form of the dreaded exercise for the reader.

Instead, I'll simply show a minimal interface (see Item 18) to a Pool class, where each object of type Pool is an allocator for objects of the size specified in the Pool's constructor:

class Pool {

public:

Pool(size_t n); // Create an allocator for

// objects of size n

void * alloc(size_t n); // Allocate enough memory

// for one object; follow

// operator new conventions

// from Item 8

void free(void *p, size_t n); // Return to the pool the

// memory pointed to by p;

// follow operator delete

// conventions from Item 8

~Pool(); // Deallocate all memory in

// the pool

};

This class allows Pool objects to be created, to perform allocation and deallocation operations, and to be destroyed. When a Pool object is destroyed, it releases all the memory it allocated. This means there is now a way to avoid the memory leak-like behavior that Airplane's functions exhibited. However, this also means that if a Pool's destructor is called too soon (before all the objects using its memory have been destroyed), some objects will find their memory yanked out from under them before they're done using it. To say that the resulting behavior is undefined is being generous.

Given this Pool class, even a Java programmer can add custom memory management capabilities to Airplane without breaking a sweat:

class Airplane {

public:

... // usual Airplane functions

static void * operator new(size_t size);

static void operator delete(void *p, size_t size);

private:

AirplaneRep *rep; // pointer to representation

static Pool memPool; // memory pool for Airplanes

};

inline void * Airplane::operator new(size_t size)

{ return memPool.alloc(size); }

inline void Airplane::operator delete(void *p, size_t size)

{ memPool.free(p, size); }

// create a new pool for Airplane objects; this goes in

// the class implementation file

Pool Airplane::memPool(sizeof(Airplane));

This is a much cleaner design than the one we saw earlier, because the Airplane class is no longer cluttered with non-airplane details. Gone is the union, the head of the free list, the constant defining how big each raw memory block should be, etc. That's all hidden inside Pool, which is really where it should be. Let Pool's author worry about memory management minutiae. Your job is to make the Airplane class work properly.

Now, it's interesting to see how custom memory management routines can improve program performance, and it's worthwhile to see how such routines can be encapsulated inside a class like Pool, but let us not lose sight of the main point. That point is that operator new and operator delete need to work together, so if you write operator new, be sure to write operator delete, as well.

 
 
 
免责声明:本文为网络用户发布,其观点仅代表作者个人观点,与本站无关,本站仅提供信息存储服务。文中陈述内容未经本站证实,其真实性、完整性、及时性本站不作任何保证或承诺,请读者仅作参考,并请自行核实相关内容。
2023年上半年GDP全球前十五强
 百态   2023-10-24
美众议院议长启动对拜登的弹劾调查
 百态   2023-09-13
上海、济南、武汉等多地出现不明坠落物
 探索   2023-09-06
印度或要将国名改为“巴拉特”
 百态   2023-09-06
男子为女友送行,买票不登机被捕
 百态   2023-08-20
手机地震预警功能怎么开?
 干货   2023-08-06
女子4年卖2套房花700多万做美容:不但没变美脸,面部还出现变形
 百态   2023-08-04
住户一楼被水淹 还冲来8头猪
 百态   2023-07-31
女子体内爬出大量瓜子状活虫
 百态   2023-07-25
地球连续35年收到神秘规律性信号,网友:不要回答!
 探索   2023-07-21
全球镓价格本周大涨27%
 探索   2023-07-09
钱都流向了那些不缺钱的人,苦都留给了能吃苦的人
 探索   2023-07-02
倩女手游刀客魅者强控制(强混乱强眩晕强睡眠)和对应控制抗性的关系
 百态   2020-08-20
美国5月9日最新疫情:美国确诊人数突破131万
 百态   2020-05-09
荷兰政府宣布将集体辞职
 干货   2020-04-30
倩女幽魂手游师徒任务情义春秋猜成语答案逍遥观:鹏程万里
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案神机营:射石饮羽
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案昆仑山:拔刀相助
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案天工阁:鬼斧神工
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案丝路古道:单枪匹马
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:与虎谋皮
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:李代桃僵
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:指鹿为马
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案金陵:小鸟依人
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案金陵:千金买邻
 干货   2019-11-12
 
推荐阅读
 
 
 
>>返回首頁<<
 
靜靜地坐在廢墟上,四周的荒凉一望無際,忽然覺得,淒涼也很美
© 2005- 王朝網路 版權所有