使用另外的配置文件来启动路由器－应用技巧

Router1#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router1(config)#service config

Router1(config)#boot network tftp Network-auto 172.25.1.1

Router1(config)#boot host tftp Router8-auto 172.25.1.1

Router1(config)#end

Router1#

注释 service config缺省是关闭的，如果打开后缺省会去查找的文件名为network-config, cisconet.cfg, router1-confg, router1.cfg 等