当前位置: 王朝网络 >> system >> HP 服务器安装 SCOUNIX 5.0.4/5（下）

HP 服务器安装 SCOUNIX 5.0.4/5（下）

王朝system·作者佚名 2006-11-24

窄屏简体版字體: 小|中|大|超大

The SCSI configuration file has been updated.

Updating system configuration …

System files have been successfully updates.

Configuring Tape Driver ...(Stp)

Enter Vendor Identification string or press <Return> to use default

Or enter q to return to main menu: 键人: HPTape

屏幕显示:

Enter SCSI version that device is conformant to or press <Return> to use default or enter q to return to main menu:

键入 Enter

屏幕显示:

Enter Response Data Format that device uses or press <Return> to use default or enter q to return to main menu: 键入Enter

屏幕显示:

The following tape drive types are supported:

1.Generic SCSI-1 / SCSI-2 Tape drive

2.EXABYTE 8mm tape drive (8200 or 8500)

3.IBM rebadged EXABYTE 8mm tape drive (8200)

4.DAT drive (Compressing and non-Compressing)

5.QIC Cartridge tape drive

Please choose one of the above, press <Return> for default, or enter q to main menu:

键入4

屏幕显示:

Tape Driver Successfully Configured

Default special device have been created with the following links:

/dev/xct0linked to /dev/xStp0

/dev/rct0linked to /dev/rStp0and /dev/rmt/0b

/dev/nrct0linked to /dev/nrStp0and /dev/rmt/0bn

In /etc/default/boot:

No current boot string.

Enter New String, “rm” to remove string, or enter q to leave current string as is:

键入:q，屏幕显示:

SCSI or Enhanced IDE Tape Drive Configuration Program 1.Install a SCSI Tape Drive

2.Install an Enhanced IDE Tape Drive

3.Remove a SCSI Tape Drive

4.Remove an Enhanced IDE tape Drive

5.Change default Tape Drive

6.View Current SCSI and Enhanced IDE Tape Drive configuration Select an option or enter q to return to main menu

键入q，屏幕显示：

Tape Drive Configuration Program 1. Configure a SCSI or Enhanced IDE tape drive

2. Configure a different type of tape drive

Select an option or enter q to quit:

You must create a new kernel to effect the drive change you specified

Do you wish to create a new kernel now? (y/n) 键入y，屏幕显示：

Do you want this kernel to boot by default? (y/n)

键入 y，屏幕显示：

Do you want the kernel environment rebuilt? (y/n)

键入 y

安装完毕，重新引导系统，即可使用磁带机。

常用的磁带机读写命令

tar tvf /dev/rct0

tar cvf /dev/rct0 directory _name or filename

tar xvf /dev/rct0

cpio –icuvdmB 30. 附加逻辑盘安装

Sco Unix不能自动识别附加逻辑盘，需要手动安装，有以下步骤：

(1)进入UNIX系统，在系统维护状态（单用户装态）下，键入命令

# mkdev hd

(2)屏幕显示

1)Add a hard disk to IDE controller

2)Add a hard disk to SCSI controller

3)Add a hard disk to IDA controller

(3)选择2

(4)屏幕显示：

Enter the prefix of the SCSI host adapter that supports this

Device Or press <Return> for the default: ‘slha'

Enter h for a list of host adapters or enter q to quit:

输入amird，然后敲Enter

(5)屏幕显示：

Which ‘amird' SCSI host adapter supports this device?

Select 0-6, or enter q to quit :

敲 0

(6)屏幕显示：

The Host Adapter parameters will be automatically configured

What SCSI Bus is this device attached to ?

Press <Return> to use the default:0

Select 0-6, or h for help, or q to quit :

敲 0

(7)屏幕显示：

What is the Target ID for this device?

Select 0-15, or h for help, or q to quit :

敲 0

(8)屏幕显示：

What is the LUN of this device ?

Press <Return> to use the default:0

Select 0-7, or h for help, or q to quit :

敲 1

(9)屏幕显示：

You are about to add the following SCSI device:

Host AdapterAdapter

TypeDeviceNumberIDLUNBUS

amirdsdsk0010 Update SCSI configuration?(y/n) ，键入y

(10)屏幕显示：

The SCSI configuration file has been updated.

A new kernel must be built and rebooted before disk configuration can

continue.Would you like to relink at this time ? (y/n)

敲y，系统重新链接内核，并reboot。

(11)因为加一块逻辑盘需要'mkdev hd'两次，所以重复过程(1)-(9)，

屏幕显示：Do you wish to continue? (y/n) ，敲y

(12)屏幕显示：

(1)Display Partition Table.

(2)Use Entire Disk for Unix

(3)Use Rest of Disk for Unix

(4)Create Unix Partition

(5)Activate Partition

(6)Delete Partition

(7)Create Partition

Enter your choice or q to quit:

选择2，此时系统激活第二块逻辑盘

(13)出现 (1) Print Current Bad Track Table

(2) Scan Disk

(3) Add Entries to Current Bad Table by Cylinder/Head number

(4) Add Entries to Current Bad Track Table by sector number.

(5) Delete Entries Individually from current Bad Track Table.

Enter your choice or q to quit.

敲回车。

(14) 出现Bad tracks have been identified

Enter the number of bad tracks to allocate space for (or press

<return> to use the recommended valve of 19)

敲回车。

(15)出 please enter swap-space allocation, or press <return> to get the

default allocation of 49000 1K block;

敲回车 (这个数值下面可调，它指的是内存的对换区的大小)

(16)出 Please enter boot-space allocation, or press <return> to get the default allocation of 15000 1K block.

敲回车

(17)出 Do you wish to make any manual adjustments to the sizes or names of the file systems on swap area before they are create on the hard disk? (Y/N)

敲回车 ( 提示是否要对上面参数进行调整)

(18)屏幕显示:

Do you wish to make any manual adjustments to the size or name of the

file systems or Swap area before they are create on the hard disk? (y/n)

输入: y 并按 Enter

(19)屏幕显示:

NameTypeNew FS#First BlockLast Block

RootSwapRootScratchRecoverHd0aEAFSNON FSHTFSNOT USEDNOT USEDNON FSNON FSWhole disknononononononono01234567020000118000--206239520643420199991179992062394--206434120643512072352 n[ame]Name or rename a division

c[reate]Create a new file system on this division

t[ype]Select or Change filesystem type on new filesystem

p[revent]Prevent a new filesystem from being created on this

division

s[tart]Start a division on a different block

e[nd]End a division on a different block

r[estore]Restore the original division table

Enter your choices or q to quit:

根据提示按 'e' 设定分区的结尾的块值。

'n' 给相应分区命名。

'r' 恢复原分区。

分区划分满意后，按 q 并回车。