sun服务器Solaris9安装
1、开机上电，等待显示器亮后，按Stop-a键。如果是在终端上安装，按Ctrl-Break键。
这时，服务器进入OK监控状态：
OK
2、将Solaris9系统盘Software 1/2插入DVD/CD-ROM，并在OK提示符下输入以下命令：
OK boot cdrom
这时，服务器从光盘上开始引导系统
3、等待一会，，系统出现如下提示：
Select a Language
0. English
1. French
2. German
3. Italian
4. Japanese
5. Korean
6. Simplified Chinese
7. Spanish
8. Swedish
9. Traditional Chinese
Please make a choice (0 - 9), or press h or ? for help:
这是选择语言，请注意，在这里一定要选择 0. English
输入0后按回车键；
4、出现如下提示：
Select a Locale
0. English (C - 7-bit ASCII)
1. Albania (ISO8859-2)
2. Australia (ISO8859-1)
3. Belgium-Flemish (ISO8859-1)
4. Belgium-Flemish (ISO8859-15 - Euro)
5. Bosnia (ISO8859-2)
6. Brazil (ISO8859-1)
7. Brazil (UTF-8)
8. Bulgaria (ISO8859-5)
9. Canada-English (ISO8859-1)
10. Catalan, Spain (ISO8859-1)
11. Catalan, Spain (ISO8859-15 - Euro)
12. Croatia (ISO8859-2)
13. Czech Republic (ISO8859-2)
14. Denmark (ISO8859-1)
15. Denmark (ISO8859-15 - Euro)
16. Egypt (ISO8859-6)
17. Egypt (UTF-8)
18. Estonia (ISO8859-15)
Press Return to show more choices.
Please make a choice (0 - 59), or press h or ? for help:
这是选择本地语言，请注意，在这里一定要选择0. English (C - 7-bit ASCII)
输入0后按回车键；
5、如果服务器接了键盘和显示器，跳过这一步；如果是在终端上安装Solaris9，这时会出现如下提示：
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return:
这是选择终端类型，我们选择 3) DEC VT100
输入3后按回车键；
6、出现如下提示：
q The Solaris Installation Program qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
The Solaris installation program is divided into a series of short sections
where you'll be prompted to provide information for the installation. At
the end of each section, you'll be able to change the selections you've
made before continuing.
About navigation...
- The mouse cannot be used
- If your keyboard does not have function keys, or they do not
respond, press ESC; the legend at the bottom of the screen
will change to show the ESC keys to use for navigation.
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
该提示告诉安装人员，Solaris的安装分为好几部分，每一部分后面都需要你进行确认，如果发现
有错，可以更改你先前输入的信息
按F2键继续安装；
7、出现如下提示：
q Identify This System qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On the next screens, you must identify this system as networked or
non-networked, and set the default time zone and date/time.
If this system is networked, the software will try to find the information
it needs to identify your system; you will be prompted to supply any
information it cannot find.
> To begin identifying this system, press F2.
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
该提示告诉安装人员，要开始定义系统的名字，网络及掩码，时区及时间
按F2键继续安装；
8、出现如下提示：
q Network Connectivity qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Specify Yes if the system is connected to the network by one of the Solaris
or vendor network/communication Ethernet cards that are supported on the
Solaris CD. See your hardware documentation for the current list of
supported cards.
Specify No if the system is connected to a network/communication card that
is not supported on the Solaris CD, and follow the instructions listed under
Help.
Networked
qqqqqqqqq
[X] Yes
[ ] No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
安装程序提示系统是否连接了网络？使用上下箭头键移动，在合适的位置停止后，按空格键，
选中该选项；
在我们的安装中，需要网络功能，因此按F2键继续安装；
9、出现如下提示：
q DHCP qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify whether or not this system should use DHCP
for network interface configuration. Choose Yes if DHCP is to be used, or
No if the interfaces are to be configured manually.
NOTE: DHCP support will not be enabled, if selected, until after the system
reboots.
Use DHCP
qqqqqqqq
[ ] Yes
[X] No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
提示是否需要使用DHCP来配置主机的IP地址；
在我们的安装中，不使用DHCP功能，因此按F2键继续安装；
10、出现提示：
q Primary Network Interface qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify which of the following network adapters is
the system's primary network interface. Usually the correct choice is the
lowest number. However, do not guess; ask your system administrator if
you're not sure.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Primary network interface
qqqqqqqqqqqqqqqqqqqqqqqqq
[X] ce0
[ ] ge0
[ ] eri0
[ ] fcip0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
选择主网卡（Primary Network Interface）
在我们的安装例子中，使用上下箭头键移动光标，移动到eri0处，按空格键选中该网卡，
按F2键继续安装；
11、出现提示：
q Host Name qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must enter your host name, which identifies this system
on the network. The name must be unique within your domain; creating a
duplicate host name will cause problems on the network after you install
Solaris.
A host name must be at least two characters; it can contain letters, digits,
and minus signs (-).
Host name:rac1
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
输入主机名，本例中，我们输入主机名rac1后按F2键继续安装；
12、出现提示：
q IP Address qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must enter the Internet Protocol (IP) address for this
system. It must be unique and follow your site's address conventions, or a
system/network failure could result.
IP addresses contain four sets of numbers separated by periods (for example
129.200.9.1).
IP address:192.168.0.1
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
提示输入主机的IP地址，本例中，输入192.168.0.1后按F2键继续安装；
13、出现提示：
q Subnets qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify whether this system is part of a subnet. If
you specify incorrectly, the system will have problems communicating on the
network after you reboot.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
System part of a subnet
qqqqqqqqqqqqqqqqqqqqqqq
[X] Yes
[ ] No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
提示主机的网络是否采用子网掩码的方法，本例中，要采用子网掩码的方法，因此按F2键继续安装；
14、出现提示：
q Netmask qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify the netmask of your subnet. A default
netmask is shown; do not accept the default u
