//程序如下所示：
//以下宏需要自定义
#define SIO_RCVALL IOC_IN | IOC_VENDOR | 1
#define SIO_RCVALL_MCAST IOC_IN | IOC_VENDOR | 2
#define SIO_RCVALL_IGMPMCAST IOC_IN | IOC_VENDOR | 3
#define SIO_KEEPALIVE_VALS IOC_IN | IOC_VENDOR | 4
#define SIO_ABSORB_RTRALERT IOC_IN | IOC_VENDOR | 5
#define SIO_UCAST_IF IOC_IN | IOC_VENDOR | 6
#define SIO_LIMIT_BROADCASTS IOC_IN | IOC_VENDOR | 7
#define SIO_INDEX_BIND IOC_IN | IOC_VENDOR | 8
#define SIO_INDEX_MCASTIF IOC_IN | IOC_VENDOR | 9
#define SIO_INDEX_ADD_MCAST IOC_IN | IOC_VENDOR | 10
#define SIO_INDEX_DEL_MCAST IOC_IN | IOC_VENDOR | 11
//自定义的结构体
typedef struct tcp_keepalive
{
u_long onoff;
u_long keepalivetime;
u_long keepaliveinterval;
}TCP_KEEPALIVE,*PTCP_KEEPALIVE;
int main(int argc, char* argv[])
{
WSADATA wsaData = {0};
if (WSAStartup(MAKEWORD(2,2), &wsaData) != 0)
{
cout << "WSAStartup failed. error code = " << WSAGetLastError() << endl;
cout << "Press any key exit." << endl;
getch();
return 0;
}
SOCKET s = INVALID_SOCKET;
//
s = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
if (s == INVALID_SOCKET)
{
cout << "socket failed. error code = " << WSAGetLastError() << endl;
}
else
{
int iKeepAlive = -1;
int iOptLen = sizeof(iKeepAlive);
//取得SO_KEEPALIVE选项信息
if (getsockopt(s, SOL_SOCKET, SO_KEEPALIVE, (char *)&iKeepAlive, &iOptLen) == SOCKET_ERROR)
{
cout << "getsockopt failed. error code = " << WSAGetLastError() << endl;
}
else
{
iKeepAlive = 1;
//这里设置成功的Keep Alive是针对操作系统的所有网络通信
if (setsockopt(s, SOL_SOCKET, SO_KEEPALIVE, (char *)&iKeepAlive, iOptLen) == SOCKET_ERROR)
{
cout << "setsockopt failed. error code = " << WSAGetLastError() << endl;
}
else
{
iKeepAlive = -1;
if (getsockopt(s, SOL_SOCKET, SO_KEEPALIVE, (char *)&iKeepAlive, &iOptLen) == SOCKET_ERROR)
{
cout << "getsockopt failed. error code = " << WSAGetLastError() << endl;
}
else if (iKeepAlive == 1)
{
TCP_KEEPALIVE inKeepAlive = {0};
unsigned long ulInLen = sizeof(TCP_KEEPALIVE);
TCP_KEEPALIVE outKeepAlive = {0};
unsigned long ulOutLen = sizeof(TCP_KEEPALIVE);
unsigned long ulBytesReturn = 0;
//设置socket的keep alive为10秒，并且发送次数为3次
inKeepAlive.onoff = 1;
inKeepAlive.keepaliveinterval = 10000;
inKeepAlive.keepalivetime = 3;
//为选定的SOCKET设置Keep Alive，成功后SOCKET可通过Keep Alive自动检测连接是否断开
if (WSAIoctl(s, SIO_KEEPALIVE_VALS,
(LPVOID)&inKeepAlive, ulInLen,
(LPVOID)&outKeepAlive, ulOutLen,
&ulBytesReturn, NULL, NULL) == SOCKET_ERROR)
{
cout << "WSAIoctl failed. error code = " << WSAGetLastError() << endl;
}
}
}
}
}
WSACleanup();
cout << "Press any key exit." << endl;
getch();
return 0;
}
