中文名: CodeGear RAD Studio 2009 Update3 Update4 And BoostUpdate
英文名: CodeGear RAD Studio 2009 Update3 Update4 And BoostUpdate
资源格式: 压缩包
版本: 2009
制作发行: http://www.embarcadero.com
地区: 美国
语言: 英文
简介:
RAD Studio 2009 Update 3, Update 4 (Database Pack) & Boost Update
For Delphi,C++Builder Version 12.0 to 12.0
Copyright: All rights reserved
Embarcadero官方发布的Rad Studio 2009的目前最新的补丁升级程序，升级后版本12.0.3420.21218
星期一至星期五9：00～17：00在线供源，长期有效。
以下资料来源于官方网站
This Readme file contains release notes for the following three separate updates that have been released simultaneously:
•Update 3 for Delphi and C++Builder 2009
•Update 4 (Database Pack) for Delphi and C++Builder 2009
•Boost library update for C++Builder 2009 only, or for C++ personality of RAD Studio 2009
IMPORTANT: You will have two or three updates available to you, depending on the CodeGear product you have installed. It is highly recommended that you install ALL the updates that are available to you. Please read the Prerequisites and Notes for each update before you attempt to install the update.
This file contains important supplementary information that might not appear in the main product documentation. CodeGear recommends that you read this file in its entirety. This document refers to "the product" when the information applies to both personalities: Delphi 2009 and C++Builder 2009.
For general information about installation, deployment, and licensing, see the Install, Deploy, and License files located, by default, at C:\Program Files\CodeGear\RAD Studio\6.0.
Prerequisites and Notes for the Updates
Prerequisites and Notes for Update 3
Delphi and C++Builder 2009 Update 3 is an MSI-based patch. Update 3 can be applied over any of the following products:
•Delphi 2009 RTM or Update 1 or Update 2
•C++Builder 2009 RTM or Update 1 or Update 2
•RAD Studio 2009 RTM or Update 1 or Update 2
For a complete list of the specific problems fixed in Update 3, see the following articles:
•For Delphi: http://dn.codegear.com/article/39387/
•For C++Builder: http://dn.codegear.com/article/39386/
You should avoid stopping the update installation once it has started. Update 3 might take 20 minutes or more to install.
Prerequisites and Notes for Update 4 (Database Pack)
Only database-related fixes are included in Update 4 (Database Pack). Update 3, which includes fixes to the rest of the product, is a prerequisite that must be installed separately.
Update 4 (Database Pack) will uninstall the previous Database Pack that was installed and install this newer version. The version of the database files in this update will be 3250.
Update 4 (Dababase Pack) can be applied over any of the following products:
•Delphi 2009 or Delphi 2009 with Update 3
•C++Builder 2009 or C++Builder 2009 with Update 3
•RAD Studio 2009 with Update 3
Update 4 (Database Pack) requires that Update 3 be applied in order to work properly. If Update 3 is not installed, please do not install Update 4. Instead, install Update 3 first and then apply Update 4. Update 4 might take ten minutes or more to install.
For a complete list of the bugs fixed in Update 4 (Database Pack), see http://www.codegear.com/article/39392/31803/ .
Installing Update 4 might take 30 minutes or more to complete.
Prerequisites and Notes for the Boost Library Update (C++Builder 2009)
The Boost library update for C++Builder 2009 is a full install of the Boost library.
You can install this Boost library update over the following product versions:
•C++Builder 2009 with Updates 3 and 4
•RAD Studio 2009 with Updates 3 and 4
Notes:
•If you have the the RTM version of C++Builder 2009 installed, you must install Updates 3 and 4 before you install the Boost library update.
•If you install Update 3 for C++Builder 2009, you must also install the Boost library update. C++Builder 2009 requires the Standard Template Library from Boost, and the C++ compiler version will change (to version 6.13) when you install Update 3. Therefore you must install the Boost library update after you install Update 3 (and optionally Update 4, the database pack) for C++Builder 2009.
The Boost library update might take 30 minutes or more to complete.
Installing the Updates
You can install the RAD Studio 2009 updates (or any of the updates in the pack) in two different ways -- either via the automatic update mechanism or by downloading the update and running the setup executable:
Downloading the Updates via the Automatic Update Mechanism
•If you selected "Check for Updates Automatically" when you installed the product, you should automatically be notified when an update is available for download. Click the notification and follow the instructions to download and install the Update.
•Checking for Updates: If you do not receive an automatic notification about the update, you can check for updates manually:
1.Select Start | Programs | CodeGear RAD Studio 2009 | Check for updates.
2.In the list of the updates, you should see the available updates already selected as follows:
■For Delphi and C++Builder 2009 or RAD Studio 2009:
Delphi and C++Builder 2009 Update 3
Delphi and C++Builder 2009 Update 4 (Database Pack)
C++Builder 2009 Boost Update *
*Note that the Boost update is only available when the C++ personality is installed, and is required if you install Update 3 for the C++ personality.
■For Delphi 2009:
Delphi and C++Builder 2009 Update 3
Delphi and C++Builder 2009 Update 4 (Database Pack)
It is recommended that you install all the available updates. If you want to install only a selected update or two, select the update(s) you want to install.
3.Click Download. After the download completes, the InstallAware wizard should automatically appear. One InstallAware wizard manages the installation of the updates.
If you do not see the InstallAware wizard, click the tray icon for the CodeGear product you are updating.
Downloading the Updates from the Registered Users Web Page
1.Obtain the updates for your product from the registered users download page, as follows:
◦Delphi 2009: http://www.codegear.com/downloads/regusers/delphi
◦C++Builder 2009: http://www.codegear.com/downloads/regusers/cppbuilder
2.Download <RADStudio2009_UpdatePack.zip> to your computer and extract the zip file.
3.Run the appropriate setup.exe to install each update you want. For Update 4 (Database Pack), you need to run dbpack_setup.exe /upgrade to install the update.
4.Install each of the three updates using a separate Setup.exe file, as follows:
Update Executable for Delphi 2009 Executable for C++Builder 2009 Executable for RAD Studio 2009
Update 3 DelphiC++Builder2009Update 3.exe DelphiC++Builder2009Update3.exe DelphiC++Builder2009Update3.exe
Update 4 (Database Pack) dbpack_setup.exe /upgrade dbpack_setup.exe /upgrade dbpack_setup.exe /upgrade
Boost library update N/A boost_setup.exe /upgrade boost_setup.exe /upgrade
Notes:
•If you download the latest ISO from the Registered Users page and you have RAD Studio 2009 installed, you must first uninstall that version (using Add/Remove Programs) before installing from the ISO. You need to do a full install, without using the /upgrade option.
•Installation of the update might take thirty minutes or more to complete. You should avoid stopping the Update installation once it has started.
•If you install Update 3 for C++Builder 2009, you must also install the Boost update (part of this update package).
Uninstalling the Updates
Uninstalling Update 3
If you need to uninstall Update 3, you must uninstall the entire product and reinstall one of the following:
•Delphi 2009, C++Builder 2009, or RAD Studio 2009 (RTM)
•An update to Delphi 2009, C++Builder 2009, or RAD Studio 2009
Uninstalling Update 4 (Database Pack)
If you need to uninstall the update, select "CodeGear Delphi and C++Builder 2009 Database Pack" in Add/Remove Programs, and click Remove. The IDE has dependencies on the Database Pack, so you should not uninstall the DataBase Pack if you will continue to use the IDE.
If you have all three personalities of RAD Studio 2009 installed (including Delphi Prism), uninstalling Update 4 (Database Pack) or uninstalling Delphi Prism will mean that you must restart the Blackfish SQL server.
Uninstalling the Boost Library
The C++ Standard Library has dependencies on Boost, so you should not uninstall Boost if you will continue to use the C++ compiler.
[安全检测]
★已通过安全检测---安全检测软件：瑞星
★病毒库发布时间：更新到即时
[安装测试]
★经过安装测试，Windows Xp SP3、Vista Ultimate SP2下安装成功，其他操作系统未测试，使用者后果自负与本论坛无关。
[免责声明]
★本帖介绍的文本内容转自网络，如有出入则以官方站点公布之信息为准，凡摘自网络相关图文介绍内容的本帖不另行标注出处，原创作者如有异议可提出以便删除。
★关于软件破解及注册机可能被杀毒软件报病毒或间谍木马（若已检测到的则将在帖中特别标注），请自行甄别和取舍，不另行加以解释。
★资源下载后请对文件做必要的安全检测，该下载内容仅限于个人测试学习之用，不得用于商业用途，并且请在下载后24小时内删除。
★各计算机系统环境各不相同，因此不保证该软件完全兼容于你的计算机系统，最终解决软件安装运行问题请联络官方站点寻求相关技术支持。
★凡标注为下载链接转自其他站点的，无法保证资源的供源以及资源本身等情况的完整性和可用性（不可控）。
★资源版权归作者及其公司所有，如果你喜欢，请购买正版。
[更多提示]
★对本资源下载前，请仔细阅读帖中介绍内容以及相关评论，以便对资源软件以及共享情况作尽可能多的了解，不主张盲目下载和回复已有说明的提问。
★软件以适用为选择，请勿轻易更新原有软件版本，非中文版本之软件可能在中文系统下无法安装运行或出现软件兼容性问题。
★为保证最新版本的软件能够顺利安装和运行，请登陆系统官方站点对系统做必要的升级和更新。
★发布之资源都将包含（破解补丁/注册机/序列号等）任一方式的信息资料，任何试用装或内嵌及捆绑广告/插件版本将不会作为共享资源提供。
★安装下载资源前的安全检测必不可少，在软件安装过程中请开启安全防护软件的实时监控。
本资源谢绝迅雷、脱兔、vagaa等吸血客户端用户下载，使用以上客户端可能无法联接到本资源下载！
