我弄了好长时间都搞不定!!!
哪位大哥大姐帮帮我!!!
拜谢!!!!!!!! 急急急急!!!!!!!!!!!!
參考答案:下文中用到的软件请到下载或在帖子中的附件下载
安装好我所提供的软件后,先运行Configure Joysticks进行设置
按"添加"
游戏控制器类型－选Virtual Joystick
然后WINDOWS安装程序会提示添加新硬件,一直"下一步"即可,选自动安装,要装两次,安装结束后会有提示"新硬件可以使用了"
然后设置控制器,选中他,点击"映射"－＞"为该控制器设置映射表"
把该控制器设置为"4轴,12开关,1POV hats"
下面的一步可以跳过,
Axis 1: X Axis,
Axis 2: Y Axis,
Axis 3: Z Axis,
Axis 4: Z Rotation
X Axis: Analog 0,
Y Axis: Analog 1,
Z Axis: Analog 2,
Z Rotation: Analog 3
Button 1: Digital 0 ... Button 12: Digital 11
然后设置POV hats:
North - Digital 12,
East - Digital 15,
West - Digital 14,
South - Digital 13
然后完成设置即可
打开PPJoyKey,按自己的习惯设置按键:(=后面是按键功能,括号里是参考设置)
Up = Up (Keyboard: up)
Down = Down (Keyboard: down)
Left = Left (Keyboard: left)
Right = Right (Keyboard: right)
Z Axis - = Freestyle move左拉杆 (Keyboard: X)
Z Axis + = Freestyle move 右拉杆(Keyboard: C)
Z Rotation - = Freestyle Crossover/Spinmove (Keyboard: F)
Z Rotation + = Backdown 靠打(Keyboard: Y)
Button 1 = Crossover假动作(；)
Button 2 = Rebound踮步突破 (Keyboard: E)
Button 3 = Turbo 加速(Keyboard: Spacebar)
Button 4 = Timeout/intentional foul要求比赛暂停 (Keyboard: Q)
Button 5 = Dunk 扣篮(Keyboard: W)
Button 6 = Pass传球 (Keyboard: S)
Button 7 = Shot投篮 (Keyboard: D)
Button 8 = Direct pass直接传球 (Keyboard: Left Ctrl)
Button 9 = Alley Oop空中接力 (Keyboard: A)
Button 10 = Superstartrigger 巨星键(Keyboard: Left Shift)
Button 11 = Off the ball 无球(Keyboard: R)
Button 12 = Pause暂定 (Keyboard: ESC)
Button 13 = Quick Plays战术键1 (Keyboard: 1)
Button 14 = Quick Plays 战术键2(Keyboard: 2)
Button 15 = Quick Plays 战术键3(Keyboard: 3)
Button 16 = Quick Plays战术键4 (Keyboard: 4)
然后点例图1中的“save.ini”这个按钮来保存为一个ini文件,下次要玩再按“load.ini”读取，就不要再重新设置了。
注意，设置完按键后不要关闭例图1中这个窗口，因为他起到模拟的作用，否则就没作用了。
然后新建一个记事本文档,复制下面内容进去:
bind pov0_s PLAYCALL4
bind pov0_n PLAYCALL3
bind pov0_e PLAYCALL2
bind pov0_w PLAYCALL1
bind button1 BACKDOWN
bind button2 TURBO
bind button3 CALLPLAY
bind button4 CROSSOVER
bind button5 PASS
bind button6 SHOOT
bind button7 DIRECTSHOOT
bind button8 FAKE
bind button9 DIRECTPASS
bind button10 DEBUG2
bind button11 PAUSE
bind button0 DEBUG1
bind axis3 RYAXISCHANGE
bind axis2 RXAXISCHANGE
bind axis1 YAXISCHANGE
bind axis0 XAXISCHANGE
ioconfig_mgr_analog 0
ioconfig_mgr_haspov 1
ioconfig_mgr_default 0
ioconfig_mgr_displayname "PPJoy"
参见例图2
点保存为"ppjoy.jfg"（保存类型要选“所有”）到My Documents\NBA LIVE 06\configs文件夹里
进入游戏,你会发现多了一个手柄设置,选ppjoy那个设置即可
