出错提示如下：
***STOP 0X0000001E (OX***********,0X8006ta57,0X***********,0Xffdff878)
KMODE_EXCEPTION_NOT_HANDLED
***Address 80067A57 base at ***********,DateStamp 381f8c6e -hal.dll
if this is the first time you've seen this stop error screen restart computer,if this Screen appears again,follow these Steps:
Check to be sure you have adequate diskspace,if a drive is identified in the stop message,disable the drive kor check with the manufacturer for driver updates.try changing video adapters.
Check with your hardware vendor for any BIOS updates.Disable BIOS Memory Options such as Caching or Shadowing . If you need to use Safe mode to remove or disable Components,restart your computer ,Push F8 to select Adranced startup Option ,and then Select Safe Mode.
Refer to your Getting Started Manuae for More information on troubleshooting Stop error.
补充：装98一点问题也没！硬盘绝对没问题，希杰40G,挂别的机器上一切正常!
參考答案:重新分区格式化，把C盘的空间控制在8-10GB左右，你在试一下。如果还不可以，建议刷BIOS
刷BIOS:
开机按DEL进入COMS,先查看一下BIOS版本,制作一个DOS启动软盘,软驱引导,不过要把BIOS升级文件给你先放到软盘里
要不你把你的机器的出厂编号给我,我把BIOS升级文件给你