NMX: Agent Manager中将Cisco交换机添加为“未知”设备问题描述
我正在使用NetMetrix (NMX) 6.0，我的Cisco交换机遇到问题。如果交换机有千兆或者ATM接口，那么在Agent Manager中Cisco交换机将添加为“未知”设备。
为什么会出现这个问题？
配置信息
操作系统 - HP-UX
版本 - 10.20
硬件系统 - HP9000
应用程序 - NetMetrix (NMX) 6.0
解决方法
这是一个已知的问题，这个问题在NMX 6.01中已得到解决。
对于大于69的介质类型 (ATM和千兆)，Agent Manager目前能够正确地读取Cisco MIB，并在Agent Manager GUI的Cisco设备名下正确地列出这些接口。
对于小于69的介质类型(以太网，高速以太网，以及令牌网)，Agent Manager不仅会正确地列出这些设备，而且支持这些设备用于NMX RMON (对于Catalyst 5000和5500)和Component Health Reporter.
注：对于大于69的介质类型，尽管这些接口在Agent Manager GUI中被正确地列出，但它们不能用于任何NMX菜单。惠普在RMON或扩展RMON中不支持千兆或ATM接口。
.........following with all English text ....
Problem Description
I am using NetMetrix (NMX) 6.0. I am having a problem with my Cisco
switches. My Cisco switches are added as 'unknown' in the Agent Manager if the switch has either a Gigabit, or an ATM interface.
Why am I having this problem?
Configuration Info
Operating System - HP-UX
Version - 10.20
Hardware System - HP9000
Application - NetMetrix (NMX) 6.0
Solution
This is a known problem. This problem is resolved in NMX 6.01.
For media types greater than 69 (ATM and Gigabit), Agent Manager now correctly reads the Cisco MIB and lists these interfaces in the Agent Manager GUI under the Cisco device name.
For media types less than 69 (Ethernet, Fast Ethernet, and Token Ring),the Agent Manager not only correctly lists the devices, but the devices
are supported for use with NMX RMON (for Catalyst 5000 and 5500) and Component Health Reporter.
Note: For media types greater than 69, although these interfaces are listed correctly in the Agent Manager GUI, they cannot
be used with any NMX menus. HP does not support Gigabit or
ATM interfaces with RMON or Extended RMON.
