俄罗斯方块C++源代码(来自网络)
/*请大家指教一下，由于自己算法的问题向左位移有些问题
在TC2下通过*/
#include <stdio.h>
#include <conio.h>
#include <dos.h>
#include <graphics.h>
#include <stdlib.h>
#include <time.h>
#include <bios.h>
#define ESC 0x011b
#define UP 0x4800
#define DOWN 0x5000
#define LEFT 0x4b00
#define RIGHT 0x4d00
#define SPACE 0x3920
#define Y 0x1579
#define N 0x316e
#define clearkbd(); while(bioskey(1)) bioskey(0); /*清空键盘缓冲队列*/
void update();
void messagebox();
void process();
void initremove();
void initinfo();
void initbox();
void initposition();
void next_shape();
typedef struct shape /*形状单一状态的记录*/
{ int attr;
int co[8];
}shape;
typedef struct RE_AB /*相对,绝对坐标记录*/
{ int Rx,Ry;
int x1,x2,y1,y2;
}RE_AB;
RE_AB RA;
shape p[19]={ { RED,0,1,1,0,1,1,2,1 }, /*数组中保证y最大的在最后，以便initposition使用*/
{ RED,0,1,1,0,1,1,1,2 },
{ RED,0,0,1,0,2,0,1,1 },
{ RED,0,0,0,1,1,1,0,2 },
{ GREEN,0,0,1,0,2,0,3,0 },
{ GREEN,0,0,0,1,0,2,0,3 },
{ CYAN,0,0,0,1,1,0,1,1 },
{ BROWN,0,0,1,0,1,1,2,1 },
{ BROWN,1,0,0,1,1,1,0,2 },
{ BLUE,1,0,2,0,1,1,0,1 },
{ BLUE,0,0,0,1,1,1,1,2 },
{ MAGENTA,0,0,0,1,0,2,1,2 },
{ MAGENTA,2,0,0,1,1,1,2,1},
{ MAGENTA,0,0,1,0,1,1,1,2 },
{ MAGENTA,0,0,0,1,1,0,2,0 },
{ YELLOW,0,2,1,0,1,1,1,2 },
{ YELLOW,0,0,1,0,2,0,2,1 },
{ YELLOW,1,0,0,0,0,1,0,2},
{ YELLOW,0,0,0,1,1,1,2,1 },
};
int nback,nleft,nright,r_f[12][22],rs1,rs2,xcors,xcorb,ycors,ycorb;
/*检查方快有没有左,右,下接触,游戏区内所有格子有无颜色记录数组,rs1形状记录,rs2为提示框用,记录小格子在游戏区中的位置,按键存储*/
void interrupt (*oldint)(); /*系统定时中断*/
int count_down=0,count_other=0; /*中断记时*/
void interrupt newint() /*设置新的中断程序*/
{ count_down++;
count_other++;
oldint();
}
void intenable() /*设置中断向量表，启动新的中断程序*/
{ oldint=getvect(0x1c);
disable();
setvect(0x1c,newint);
enable();
}
void intrestore() /*恢复中断向量*/
{ disable();
setvect(0x1c,oldint);
enable();
}
void HZ12(int x0,int y0,int w,int color,char *s) /*根据字模,在dos下显示汉字*/
/*横坐标,纵坐标,字间隔,汉字颜色,汉字字符串*/
{ FILE *fp;
register char buffer[24];
register char str[2];
unsigned long fpos;/*fpos为最终偏移动量*/
register int i,j,k;
fp=fopen("hzk12","r");/*打开12*12汉字苦*/
while(*s)/*一直到字符串结束为止*/
{
if(*s<0)/*汉字输出*/
{ str[0]=(*s)-0xa0;
str[1]=*(s+1)-0xa0;
fpos=((str[0]-1)*94+(str[1]-1))*24L;/*计算汉字在hzk12的偏移量*/
fseek(fp,fpos,SEEK_SET);/*指针移动到当前位置*/
fread(buffer,24,1,fp);/*读取一个汉字到数组中*/
for(i=0;i<12;i++)/*12行*/
for(j=0;j<2;j++)/*两个字节*/
for(k=0;k<8;k++)/*8位*/
if (((buffer[i*2+j]>>(7-k))&0x1)!=NULL)/*是一就画点*/
putpixel(x0+8*j+k,y0+i,color);
s+=2;/*一个汉字占两个字节，现在将指针移动两个字节*/
x0+=w;/*显示坐标也按照间隔移动*/
}
else/*显示非汉字字符*/
{ settextstyle(0,0,1);
setcolor(color);
str[0]=*s;str[1]=0;
outtextxy(x0,y0+3,str);/*显示单个字符*/
x0+=w-7;/*显示单个字符后的x坐标变化*/
s++;/*指针移动到下一个字节*/
}
}
fclose(fp);
}
void translation() /*把相对坐标解释为绝对坐标*/
{ if(RA.Rx==1)
{ RA.x1=1; RA.x2=16; }
else
{ RA.x1=16*(RA.Rx-1); RA.x2=16*RA.Rx; }
if(RA.Ry==1)
{ RA.y1=1; RA.y2=16; }
else
{ RA.y1=16*(RA.Ry-1); RA.y2=16*RA.Ry; }
}
int check_b() /*检查是否到达低部*/
{ int x,y,i,zf=0; /*zf为是否有颜色填充记录*/
for(i=0;i<7;i++,i++)
{ x=RA.Rx+p[rs1].co[i];
y=RA.Ry+p[rs1].co[i+1];
if(y>=6)
zf+=r_f[x-15][y-6+1];
}
if(zf==0)
return 1;
else
return 0;
}
int finish()
{ int tfull=0,i; /*判断顶层空间是否有填充*/
for(i=1;i<11;i++)
tfull+=r_f[i][1];
if(tfull!=0)
return 1; /*告诉judge()可以结束了*/
}
int check_l() /*检查形状是否与左接触*/
{ int x,y,i,zf=0;
for(i=0;i<7;i++,i++)
{ x=RA.Rx+p[rs1].co[i];
y=RA.Ry+p[rs1].co[i+1];
if(y>6)
zf+=r_f[x-15-1][y-6];
if(y<=6&&x==16)
zf+=1;
}
if(zf==0)
return 1;
else
return 0;
}
int check_r() /*检查形状是否与右接触*/
{ /*zf为是否有颜色填充记录*/
int x,y,i,zf=0; /*zf为是否有颜色填充记录*/
for(i=0;i<7;i++,i++)
{
x=RA.Rx+p[rs1].co[i];
y=RA.Ry+p[rs1].co[i+1];
if(y>6)
zf+=r_f[x-15+1][y-6];
if(y<=6&&x==25)
zf+=1;
}
if(zf==0)
return 1;
else
return 0;
}
void check_touch()
{ nback=check_b();
nleft=check_l();
nright=check_r();
}
void draw(int cb) /*画形状,cb=1以填充色画形状，cb=2以背景色画形状,cb=3以白色画形状*/
{ int i,recordx=RA.Rx,recordy=RA.Ry;
for(i=0;i<7;i++,i++)
{ RA.Rx+=p[rs1].co[i];
RA.Ry+=p[rs1].co[i+1];
if(RA.Ry<=6)
{ RA.Rx=recordx;
RA.Ry=recordy;
continue;
}
translation();
if(cb==1)
setfillstyle(1,p[rs1].attr);
else
if(cb==2)
setfillstyle(1,BLACK);
else
if(cb==3)
{ setfillstyle(1,WHITE);
r_f[RA.Rx-15][RA.Ry-6]=1; /*置对应数组标记元素*/
}
bar(RA.x1+1,RA.y1+1,RA.x2-1,RA.y2-1);
RA.Rx=recordx;
RA.Ry=recordy;
}
}
void mov(int key) /*向下,左,右移动方块*/
{ draw(2);
if(key==LEFT&&nleft)
RA.Rx--;
else
if(key==RIGHT&&nright)
RA.Rx++;
else
RA.Ry++;
nback=check_b();
if(nback) /*判断形状有没有到达底部，有就将其颜色变为白色*/
draw(1);
else
draw(3);
}
void change() /*变换形状*/
{ int status=rs1,buffer,i,x,y,zf=0;
if(p[rs1].attr==p[rs1+1].attr)
rs1++;
else
while(p[rs1].attr==p[rs1-1].attr)
rs1--;
for(i=0;i<7;i++,i++) /*检查变化形状后是否与已存形状发生冲突*/
{ x=RA.Rx+p[rs1].co[i];
y=RA.Ry+p[rs1].co[i+1];
if(y>6)
zf+=r_f[x-15][y-6];
}
if(zf!=0)
rs1=status;
buffer=rs1;
rs1=status;
status=buffer;
draw(2);
buffer=rs1;
rs1=status;
status=buffer;
nback=check_b(); /*判断变化后的形状是不是到达了低部,这个检查是十分必要的*/
if(nback)
draw(1);
else
draw(3);
}
void accelerate()
{ if(count_down>=1)
{ check_touch(); /*消除上一步动作对方块状态的影响*/
count_down=0;
if(nback) /*0表示到达底部,1表示没有到达*/
mov(DOWN);
}
}
void drawbox() /*画方块所在方框*/
{ int xcor,ycor;
for(xcor=xcors;xcor<=xcorb;xcor++)
for(ycor=ycors;ycor<=ycorb;ycor++)
{ if(xcor==xcors||xcor==xcorb||ycor==ycors||ycor==ycorb)
{ RA.Rx=xcor;
RA.Ry=ycor;
translation();
setfillstyle(1,DARKGRAY);
bar(RA.x1+1,RA.y1+1,RA.x2-1,RA.y2-1);
}
}
}
void erasure(int k)
{ int i,j,recordx=RA.Rx,recordy=RA.Ry;
{ j=k-1;
for(;j>0;j--)
{ for(i=1;i<11;i++)
{ r_f[i][j+1]=r_f[i][j];
RA.Rx=i+15;
RA.Ry=j+1+6;
translation();
if(r_f[i][j+1]==1)
setfillstyle(1,WHITE);
else
setfillstyle(1,BLACK);
bar(RA.x1+1,RA.y1+1,RA.x2-1,RA.y2-1);
RA.Rx=recordx;
RA.Ry=recordy;
}
}
}
}
void pause()
{ HZ12(450,400,15,BLACK,"正常");
HZ12(450,400,15,GREEN,"暂停");
for(;;)
if(bioskey(1)&&bioskey(0)==SPACE)
{ clearkbd();
HZ12(450,400,15,BLACK,"暂停");
HZ12(450,400,15,RED,"正常");
return;
}
}
void judge()
{ int i,j,full=0; /*full等于10说明某一行满,该消除了*/
if(finish()) /*判断游戏是否该结束了*/
messagebox(); /*win编程里有这个函数*/
for(j=1;j<21;j++) /*判断某一行是否满了*/
{ for(i=1;i<11;i++)
full+=r_f[i][j];
if(full==10)
erasure(j); /*消除这行*/
full=0;
}
}
void update() /*使程序可以重新运行*/
{ cleardevice();
setbkcolor(BLACK);
initinfo(); /*提示信息初始化*/
initbox(); /*游戏框架初始化*/
srand((unsigned)time(NULL)); /*随机器函数的初始化*/
rs1=random(19);
rs2=random(19);
next_shape();
initposition(); /*方块最开始的出现位置*/
initremove(); /*记录每个方格有无颜色填充数组初始化*/
HZ12(450,400,15,RED,"正常");
process();
}
void EXIT()
{ closegraph();
intrestore(); /*恢复中断向量*/
exit(0);
}
void initremove()
{ int i,j;
for(i=0;i<12;i++)
for(j=0;j<22;j++)
if(i==0||i==11||j==0||j==21)
r_f[i][j]=1;
else
r_f[i][j]=0;
}
void initinfo()
{ char aStr[2];
setcolor(RED);
outtextxy(450,100,"This game's writer is:");
HZ12(450,140,15,RED,"该程序作者:NULL");
outtextxy(525,110,"NULL");
outtextxy(450,180,"FUNCTION FOR KEYS:");
outtextxy(450,200,"UP:change the shape");
outtextxy(450,210,"DOWN:accelerate");
outtextxy(450,220,"LEFT:move left");
outtextxy(450,230,"RIGHT:move right");
outtextxy(450,240,"ESC:exit this game");
outtextxy(450,250,"SPACE:pause");
HZ12(450,260,20,RED,"上:");
HZ12(450,280,20,RED,"下:");
HZ12(450,300,20,RED,"左:");
HZ12(450,320,20,RED,"右:");
HZ12(450,340,20,RED,"ESC:退出");
HZ12(450,360,15,RED,"空格: 暂停/开始");
HZ12(450,380,15,RED,"目前状态:");
HZ12(20,200,15,RED,"下一个形状");
aStr[0]=24;
aStr[1]=0;
aStr[6]=0;
HZ12(480,260,12,GREEN,aStr);
HZ12(500,260,12,GREEN,"( 变形 )");
aStr[0]=25;
aStr[1]=0;
HZ12(480,280,12,GREEN,aStr);
HZ12(500,280,12,GREEN,"( 加速 )");
aStr[0]=27;
aStr[1]=0;
HZ12(480,300,12,GREEN,aStr);
HZ12(500,300,12,GREEN,"向左");
aStr[0]=26;
aStr[1]=0;
HZ12(480,320,12,GREEN,aStr);
HZ12(500,320,12,GREEN,"向右");
}
void messagebox()
{ int key;
setcolor(GREEN);
setfillstyle(1,DARKGRAY);
rectangle(220,200,420,300);
bar(221,201,419,299);
HZ12(280,210,15,GREEN,"GAME OVER");
HZ12(275,230,15,GREEN,"重新游戏: Y");
HZ12(275,270,15,GREEN,"退出游戏: N");
HZ12(450,400,15,BLACK,"正常");
HZ12(450,400,15,GREEN,"GAME OVER");
for(;;)
if(bioskey(1))
{ key=bioskey(0);
if(key==Y)
{ clearkbd();
update();
}
else
if(key==N)
{ clearkbd();
EXIT();
}
else
clearkbd();
}
}
void initbox()
{ xcors=15; /*画游戏框*/
xcorb=26;
ycors=6;
ycorb=27;
drawbox();
xcors=2; /*画提示框*/
xcorb=7;
ycors=6;
ycorb=11;
drawbox();
}
void initposition()
{ RA.Rx=18;
RA.Ry=6-p[rs1].co[7];;
RA.x1=0;
RA.x2=0;
RA.y1=0;
RA.y2=0;
}
void next_shape() /*画下一形状提示框*/
{ int recordx=RA.Rx,recordy=RA.Ry,buffer;
RA.Rx=3;
RA.Ry=7;
draw(2);
buffer=rs1;
rs1=rs2;
rs2=buffer;
draw(1);
RA.Rx=recordx;
RA.Ry=recordy;
buffer=rs1;
rs1=rs2;
rs2=buffer;
}
void process() /*游戏过程*/
{ for(;;)
{ check_touch();
if(!nback)
{ rs1=rs2;
rs2=random(19); /*产生另一种方块的码数*/
initposition();
judge(); /*判断某一行是否满了和这个游戏是否可以结束了*/
draw(1);
next_shape();
}
if(count_other>=1)
{ count_other=0;
if(bioskey(1)) /*对按键的处理*/
{ int key=bioskey(0);
clearkbd(); /*清除键盘缓冲队列*/
if(key==ESC)
EXIT();
if(key==LEFT&&nleft&&nback)
mov(LEFT);
if(key==RIGHT&&nright&&nback)
mov(RIGHT);
if(key==UP&&nback)
change();
if(key==SPACE)
pause();
if(key==DOWN)
accelerate();
}
}
if(count_down>=4)
{ check_touch(); /*消除上一步动作对方块状态的影响*/
count_down=0;
if(nback) /*0表示到达底部,1表示没有到达*/
mov(DOWN);
}
}/*for*/
}
main()
{ int gdriver=DETECT,gmode=0;
initgraph(&gdriver,&gmode,"c:\\turboc2"); /*启动图形与中断部分*/
intenable();
update();
}
