拓扑图如下：
一、 Catalyst 6509交换机配置方案
1.1、配置6509二层交换
Console (enable) set system name bg-sw-01 /设备名称
Bg-sw-01 (enable) set passWord
Enter old password:
Enter new password: test /设备口令
Retype new password: test
Bg-sw-01 (enable) set enablepass
Enter old password:
Enter new password: test /设备口令
Retype new password: test
Bg-sw-01 (enable) set banner motd % Welcome to the c6509 in the Office %/提示文本
Bg-sw-01 (enable) set interface sc0 10.234.180.21 255.255.255.0 /设置治理接口 #sh int
Bg-sw-01 (enable) set ip route default 10.234.180.234 /设置默认网关 #sh ip route
Bg-sw-01 (enable) set vtp mode server /设置VTP模式 #sh vtp domain
Bg-sw-01 (enable) set vtp domain Core_Net /设置VTP域名
Bg-sw-01 (enable) set vlan 31 name ZhongSanLu /创建VLAN #sh vlan
Bg-sw-01 (enable) set vlan 32 name YiYang
Bg-sw-01 (enable) set vlan 33 name JianXiu
Bg-sw-01 (enable) set vlan 34 name RaoDian
Bg-sw-01 (enable) set vlan 35 name JinSanLou
Bg-sw-01 (enable) set vlan 36 name WuZi
Bg-sw-01 (enable) set port channel 1/1-2 on /设置Channel #sh port channel
Bg-sw-01 (enable) set trunk 1/1 on dot1q 1-1005
Bg-sw-01 (enable) set trunk 2/2 on dot1q 1-1005 /设置trunk口 #sh trunk #
Bg-sw-01 (enable) set trunk 2/3 on dot1q 1-1005
Bg-sw-01 (enable) set trunk 2/4 on dot1q 1-1005
Bg-sw-01 (enable) set trunk 2/5 on dot1q 1-1005
Bg-sw-01 (enable) set trunk 2/6 on dot1q 1-1005
Bg-sw-01 (enable) set trunk 2/7 on dot1q 1-1005
Bg-sw-01 (enable) set spantree root 1-40 dia 4 /设为spantree的根#sh spantree
Bg-sw-01 (enable) set spantree portfast 1/1-2 enable /设spantree端口快速启用
Bg-sw-01 (enable) set spantree portfast 2/1-8 enable
Bg-sw-01 (enable) set spantree uplinkfastenable /设spantree端口快速切换
Bg-sw-01 (enable) set spantree backbonefast enable /设spantree端口快速定位根
1.2、配置路由
Console (enable) session 15/进入路由子卡
Router(config)# hostname c6509-msfc /设备名
c6509-msfc (config)# enable password test /设口令
c6509-msfc (config)# enable secret test
C6509-msfc(config)# banner motd % Welcome to the c6509-msfc in the Office %/设提示文本
c6509-msfc (config)# line vty 0 4 / 进入VTY模式
c6509-msfc (config-line)#login/ 登入提示
c6509-msfc (config-line)#password test / 设用户级口令
c6509-msfc (config-line)# end
C6509-msfc#configure terminal / 进入全局模式
Enter configuration commands, one per line. End with CNTL/Z.
C6509-msfc(config)# interface vlan 1/进入虚子接口
C6509-msfc(config-if)# ip address 10.234.180.232 255.255.255.0 /加ip地址
C6509-msfc(config-if)# no shutdown/开启端口
C6509-msfc(config-if)# standby 1 ip 10.234.180.234/建HSRP组并设虚IP地址
C6509-msfc(config-if)# standby 1 PRiority 110 /设优先级
C6509-msfc(config-if)# standby 1 preempt/设切换许可
C6509-msfc(config-if)# interface vlan 31
C6509-msfc(config-if)# ip address 10.234.181.60 255.255.255.192
C6509-msfc(config-if)# no shutdown
C6509-msfc(config-if)# standby 31 ip 10.234.181.62
C6509-msfc(config-if)# standby 31 priority 110
C6509-msfc(config-if)# standby 31 preempt
C6509-msfc(config-if)# interfacevlan 32
C6509-msfc(config-if)# ip address 10.234.181.124 255.255.255.192
C6509-msfc(config-if)# no shutdown
C6509-msfc(config-if)# standby 32 ip 10.234.181.126
C6509-msfc(config-if)# standby 32 priority 110
C6509-msfc(config-if)# standby 32 preempt
C6509-msfc(config-if)# interface vlan 33
C6509-msfc(config-if)# ip address 10.234.181.188 255.255.255.192
C6509-msfc(config-if)# no shutdown
C6509-msfc(config-if)# standby 33 ip 10.234.181.190
C6509-msfc(config-if)# standby 33 priority 110
C6509-msfc(config-if)# standby 33 preempt
C6509-msfc(config-if)# interface vlan 34
C6509-msfc(config-if)# ip address 10.234.181.220 255.255.255.224
C6509-msfc(config-if)# no shutdown
C6509-msfc(config-if)# standby 34 ip 10.234.181.222
C6509-msfc(config-if)# standby 34 priority 110
C6509-msfc(config-if)# standby 34 preempt
C6509-msfc(config-if)# interface vlan 35
C6509-msfc(config-if)# ip address 10.234.181.254 252.255.255.224
C6509-msfc(config-if)# no shutdown
C6509-msfc(config-if)# standby 35 ip 10.234.181.254
C6509-msfc(config-if)# standby 35 priority 110
C6509-msfc(config-if)# standby 35 preempt
C6509-msfc(config-if)# interface vlan 36
C6509-msfc(config-if)# ip address 10.234.182.28 255.255.255.224
C6509-msfc(config-if)# no shutdown
C6509-msfc(config-if)# standby 36 ip 10.234.182.30
C6509-msfc(config-if)# standby 36 priority 110
C6509-msfc(config-if)# standby 36 preempt
C6509-msfc(config-if)# exit
C6509-msfc #copy running config
二、Catalyst 4006交换机配置方案
2.1、配置4006二层交换（三层交换模块安置在第二个槽）
Console (enable) set system name bg-sw-02 /设备名称
Bg-sw-02 (enable) set password
Enter old password:
Enter new password: test /设备口令
Retype new password: test
Bg-sw-02 (enable) set enablepass
Enter old password:
Enter new password: test /设备口令
Retype new password: test
Bg-sw-02 (enable) set banner motd % Welcome to the c4006 in the office % /提示文本
Bg-sw-02 (enable) set interface sc0 10.234.180.22 255.255.255.0 /设置治理接口 #sh int
Bg-sw-02 (enable) set ip route default 10.234.180.234 /设置默认网关 #sh ip route
Bg-sw-02 (enable) set vtp mode server /设置VTP模式 #sh vtp domain
Bg-sw-02 (enable) set vtp domain Core_Net /设置VTP域名
Bg-sw-02 (enable) set vlan 31 name ZhongSanLu /创建VLAN #sh vlan
Bg-sw-02 (enable) set vlan 32 name YiYang
Bg-sw-02 (enable) set vlan 33 name JianXiu
Bg-sw-02 (enable) set vlan 34 name RaoDian
Bg-sw-02 (enable) set vlan 35 name JinSanLou
Bg-sw-02 (enable) set vlan 36 name WuZi
Bg-sw-02 (enable) set port channel 1/1-2 on /设置Channel #sh port channel
Bg-sw-02 (enable) set trunk 1/1 on dot1q 1-1005
Bg-sw-02 (enable) set port channel 2/1-2 on /设置Channel #sh port channel
Bg-sw-02 (enable) set trunk 2/1 on dot1q 1-1005
Bg-sw-02 (enable) set trunk 4/1 on dot1q 1-1005 /设置trunk口 #sh trunk #
Bg-sw-02 (enable) set trunk 4/3 on dot1q 1-1005
Bg-sw-02 (enable) set trunk 4/4 on dot1q 1-1005
Bg-sw-02 (enable) set spantree root secondary 1-40 dia 4
Bg-sw-02 (enable) set spantree portfast 1/1-2 enable /设spantree端口快速启用
Bg-sw-02 (enable) set spantree portfast 2/1-34 enable
Bg-sw-02 (enable) set spantree portfast 3/1-32 enable
Bg-sw-02 (enable) set spantree portfast 4/1-6 enable
Bg-sw-02 (enable) set spantree uplinkfastenable /设spantree端口快速切换
Bg-sw-02 (enable) set spantree backbonefast enable /设spantree端口快速定位根
2.1、配置三层交换模块（三层交换模块安置在第二）
Console (enable) session 2 /进入路由子卡
Router(config)# hostname c4006-L3 /设备名
c4006-L3 (config)# enable password test /设口令
c4006-L3 (config)# enable secret test
c4006-L3(config)# banner motd % Welcome to the c4006-l3 in the Office % /设提示文本
c4006-L3 (config)# line vty 0 4 / 进入VTY模式
c4006-L3 (config-line)#login/ 登入提示
c4006-L3 (config-line)#password test / 设用户级口令
c4006-L3 (config-line)# end
C4006-L3#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
C4006-L3(config)# interface port-channel 1 /建内部虚端口
C4006-L3(config)# interface g3 /进入接口模式
C4006-L3(config-if)# channel-group 1 / 加入到channel组中
C4006-L3(config-if)# exit
C4006-L3(config)# interface g4 /进入接口模式
C4006-L3(config-if)# channel-group 1 / 加入到channel组中
C4006-L3(config-if)# exit
C4006-L3(config)# interface port-channel 1.1 /进入子接口模式
C4006-L3(config-if)# encapsulation dot1q 1 native/ 封装trunk
C4006-L3(config-if)# ip address 10.234.180.233 255.255.255.0/加ip地址
C4006-L3(config-if)# no shutdown /开启端口
C4006-L3(config-if)# standby 1 ip 10.234.180.234 /建HSRP组并设虚IP地址
C4006-L3(config-if)# standby 1 priority 100 /设优先级
C4006-L3(config-if)# standby 1 preempt /设切换许可
C4006-L3(config-if)# interface port-channel 1.31
C4006-L3(config-if)# encapsulation dot1q 31
C4006-L3(config-if)# ip address 10.234.181.61 255.255.255.192
C4006-L3(config-if)# no shutdown
C4006-L3(config-if)# standby 31 ip 10.234.181.62
C4006-L3(config-if)# standby 31 priority 100
C4006-L3(config-if)# standby 31 preempt
C4006-L3(config-if)# interface port-channel 1.32
C4006-L3(config-if)# encapsulation dot1q 32
C4006-L3(config-if)# ip address 10.234.181.125 255.255.255.192
C4006-L3(config-if)# no shutdown
C4006-L3(config-if)# standby 32 ip 10.234.181.126
C4006-L3(config-if)# standby 32 priority 100
C4006-L3(config-if)# standby 32 preempt
C4006-L3(config-if)# interface port-channel 1.33
C4006-L3(config-if)# encapsulation dot1q 33
C4006-L3(config-if)# ip address 10.234.181.189 255.255.255.192
C4006-L3(config-if)# no shutdown
C4006-L3(config-if)# standby 33 ip 10.234.181.190
C4006-L3(config-if)# standby 33 priority 100
C4006-L3(config-if)# standby 33 preempt
C4006-L3(config-if)# interface port-channel 1.34
C4006-L3(config-if)# encapsulation dot1q 34
C4006-L3(config-if)# ip address 10.234.181.221 255.255.255.224
C4006-L3(config-if)# no shutdown
C4006-L3(config-if)# standby 34 ip 10.234.181.222
C4006-L3(config-if)# standby 34 priority 100
C4006-L3(config-if)# standby 34 preempt
C4006-L3(config-if)# interface port-channel 1.35
C4006-L3(config-if)# encapsulation dot1q 35
C4006-L3(config-if)# ip address 10.234.181.253 255.255.255.224
C4006-L3(config-if)# no shutdown
C4006-L3(config-if)# standby 35 ip 10.234.181.254
C4006-L3(config-if)# standby 35 priority 100
C4006-L3(config-if)# standby 35 preempt
C4006-L3(config-if)# interface port-channel 1.36
C4006-L3(config-if)# encapsulation dot1q 36
C4006-L3(config-if)# ip address 10.234.182.29 255.255.255.224
C4006-L3(config-if)# no shutdown
C4006-L3(config-if)# standby 36 ip 10.234.182.30
C4006-L3(config-if)# standby 36 priority 100
C4006-L3(config-if)# standby 36 preempt
C4006-L3(config-if)# exit
C4006-L3#copy running config
三、Catalyst 3500XL交换机配置方案
3.1、办公楼Catalyst 3500XL交换机配置方案
第一台Catalyst 3548
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#hostname bg-sw-03 /设备名
bg-sw-03(config)#enable password test /设口令
bg-sw-03(config)#enable secret test
bg-sw-03(config)#banner motd % Welcome to the C3548 in the Office % /提示文本
bg-sw-03(config)#line vty 0 4 / 进入VTY模式
bg-sw-03(config.line)#login / 登入提示
bg-sw-03(config.line)#password test / 设用户级口令
bg-sw-03(config.line)#exit
bg-sw-03 (config)#int vlan 1 / 进入内部治理接口
bg-sw-03 (config-if)#ip address 10.234.180.23 255.255.255.0/加入IP地址
bg-sw-03(config-if)#exit
bg-sw-03(config)#ip default.gateway 10.234.180.234 /设网关
bg-sw-03(config)#end
bg-sw-03#vlan database / 进入vtp数据库
bg-sw-03(vlan)#vtp domain Corp_Net /设vtp域
bg-sw-03(vlan)#vtp client /设定vtp模式
bg-sw-03(vlan)#exit
bg-sw-03(config)#spantree uplinkfast/设定端口快速上连
bg-sw-03(config)#int g0/1 /进入接口模式
bg-sw-03(config-if)#switchport mode trunk /设为trunk模式
bg-sw-03(config-if)#switchport trunk encapsulation dot1q/设定封装模式
bg-sw-03(config-if)#switchport trunk allowed vlan all /设定trunk许可vlan
bg-sw-03(config-if)#spanning-tree portfast /设定端口快速启用
bg-sw-03(config-if)#int g0/2/进入接口模式
bg-sw-03(config-if)#switchport mode trunk /设为trunk模式
bg-sw-03(config-if)#switchport trunk encapsulation dot1q/设定封装模式
bg-sw-03(config-if)#switchport trunk allowed vlan all /设定trunk许可vlan
bg-sw-03(config-if)#spanning-tree portfast /设定端口快速启用
bg-sw-03(config-if)#exit
bg-sw-03#write memory
第二台Catalyst 3548
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#hostname bg-sw-04 /设备名
bg-sw-04(config)#enable password test /设口令
bg-sw-04(config)#enable secret test
bg-sw-04(config)#banner motd % Welcome to the C3548 in the Office % /提示文本
bg-sw-04(config)#line vty 0 4 / 进入VTY模式
bg-sw-04(config.line)#login / 登入提示
bg-sw-04(config.line)#password test / 设用户级口令
bg-sw-04(config.line)#exit / 进入内部治理接口
bg-sw-04(config)#int vlan 1
bg-sw-04(config-if)#ip address 10.234.180.24 255.255.255.0
bg-sw-04(config-if)#exit
bg-sw-04(config)#ip default.gateway 10.234.180.234
bg-sw-04(config)#end
bg-sw-04#vlan database
bg-sw-04(vlan)#vtp domain Corp_Net
bg-sw-04(vlan)#vtp client
bg-sw-04(vlan)#exit
bg-sw-04(config)#spantree uplinkfast
bg-sw-04(config)#int g0/1
bg-sw-04(config-if)#switchport mode trunk
bg-sw-04(config-if)#switchport trunk encapsulation dot1q
bg-sw-04(config-if)#switchport trunk allowed vlan all
bd-sw-03 (config-if)# spanning-tree portfast
bg-sw-04(config-if)#exit
bg-sw-04(config)#int g0/2
bg-sw-04(config-if)#switchport mode trunk
bg-sw-04(config-if)#switchport trunk encapsulation dot1q
bg-sw-04(config-if)#switchport trunk allowed vlan all
bg-sw-04(config-if)#spanning-tree portfast
bg-sw-04(config-if)#exit
bg-sw-04#write memory
3.2 办公楼Catalyst 3548XL交换机配置方案
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#hostname zsr-sw-01
zsr-sw-01(config)#enable password test
zsr-sw-01(config)#enable secret test
zsr-sw-01(config)#banner motd % Welcome to the C3548 in the Zhong San Lu ban Gong Lou %
zsr-sw-01(config)#line vty 0 4
zsr-sw-01(config.line)#login
zsr-sw-01(config.line)#password test
zsr-sw-01(config.line)#exit
zsr-sw-01(config)#int vlan 1
zsr-sw-01(config-if)#ip address 10.234.180.25 255.255.255.0
zsr-sw-01(config-if)#exit
zsr-sw-01(config)#ip default.gateway 10.234.180.234
zsr-sw-01(config)#end
zsr-sw-01#vlan database
zsr-sw-01(vlan)#vtp domain Corp_Net
zsr-sw-01(vlan)#vtp client
zsr-sw-01(vlan)#exit
zsr-sw-1#configure terminal
zsr-sw-1(config)#int f0/1
zsr-sw-1(config-if)#switchport mode access
zsr-sw-1(config-if)#switchport access vlan 31
zsr-sw-1(config-if)#exit
zsr-sw-1(config)#int f0/2
。。。。。。
zsr-sw-1(config)#int f0/48
zsr-sw-1(config-if)#switchport mode access
zsr-sw-1(config-if)#switchport access vlan 31
zsr-sw-1(config-if)#exit
zsr-sw-01(config)#int g0/1
zsr-sw-01(config-if)#switchport mode trunk
zsr-sw-01(config-if)#switchport trunk encapsulation dot1q
zsr-sw-01(config-if)#switchport trunk allowed vlan all
zsr-sw-01 (config-if)#spantree cost 10
zsr-sw-01(config-if)#exit
zsr-sw-01(config)#int g0/2
zsr-sw-01(config-if)#switchport mode trunk
zsr-sw-01(config-if)#switchport trunk encapsulation dot1q
zsr-sw-01(config-if)#switchport trunk allowed vlan all
zsr-sw-01 (config-if)#spantree cost 20
zsr-sw-01(config-if)#exit
zsr-sw-01#write memory
3.3 局办公楼Catalyst 3548XL交换机配置方案
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#hostname yy-sw-01
yy-sw-01(config)#enable password test
yy-sw-01(config)#enable secret test
yy-sw-01(config)#banner motd % Welcome to the C3548 in the Yi Yang Fen Ju %
yy-sw-01(config)#line vty 0 4
yy-sw-01(config.line)#login
yy-sw-01(config.line)#password test
yy-sw-01(config.line)#exit
yy-sw-01(config)#int vlan 1
yy-sw-01(config-if)#ip address 10.234.180.26 255.255.255.0
yy-sw-01(config-if)#exit
yy-sw-01(config)#ip default.gateway 10.234.180.234
yy-sw-01(config)#end
yy-sw-01#vlan database
yy-sw-01(vlan)#vtp domain Corp_Net
yy-sw-01(vlan)#vtp client
yy-sw-01(vlan)#exit
yy-sw-1#configure terminal
yy-sw-1(config)#int f0/1
yy-sw-1(config-if)#switchport mode access
yy-sw-1(config-if)#switchport access vlan 32
yy-sw-1(config-if)#exit
yy-sw-1(config)#int f0/2
。。。。。。
yy-sw-1(config)#int f0/48
yy-sw-1(config-if)#switchport mode access
yy-sw-1(config-if)#switchport access vlan 32
yy-sw-1(config-if)#exit
yy-sw-01#write memory
3.4 检修设计Catalyst 3548XL交换机配置方案
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#hostname jxsj-sw-01
jxsj-sw-01(config)#enable password test
jxsj-sw-01(config)#enable secret test
jxsj-sw-01(config)#banner motd % Welcome to the C3548 in the Jian Xiu She Ji Fen Ju %
jxsj-sw-01(config)#line vty 0 4
jxsj-sw-01(config.line)#login
jxsj-sw-01(config.line)#password test
jxsj-sw-01(config.line)#exit
jxsj-sw-01(config)#int vlan 1
jxsj-sw-01(config-if)#ip address 10.234.180.27 255.255.255.0
jxsj-sw-01(config-if)#exit
jxsj-sw-01(config)#ip default.gateway 10.234.180.234
jxsj-sw-01(config)#end
jxsj-sw-01#vlan database
jxsj-sw-01(vlan)#vtp domain Corp_Net
jxsj-sw-01(vlan)#vtp client
jxsj-sw-01(vlan)#exit
jxsj-sw-1#configure terminal
jxsj-sw-1(config)#int f0/1
jxsj-sw-1(config-if)#switchport mode access
jxsj-sw-1(config-if)#switchport access vlan 33
jxsj-sw-1(config-if)#exit
jxsj-sw-1(config)#int f0/2
。。。。。。
jxsj-sw-1(config)#int f0/48
jxsj-sw-1(config-if)#switchport mode access
jxsj-sw-1(config-if)#switchport access vlan 33
jxsj-sw-1(config-if)#exit
jxsj-sw-01(config)#int g0/1
jxsj-sw-01(config-if)#switchport mode trunk
jxsj-sw-01(config-if)#switchport trunk encapsulation dot1q
jxsj-sw-01(config-if)#switchport trunk allowed vlan all
jxsj-sw-01 (config-if)#spantree cost 10
jxsj-sw-01(config-if)#exit
jxsj-sw-01(config)#int g0/2
jxsj-sw-01(config-if)#switchport mode trunk
jxsj-sw-01(config-if)#switchport trunk encapsulation dot1q
jxsj-sw-01(config-if)#switchport trunk allowed vlan all
jxsj-sw-01 (config-if)#spantree cost 20
jxsj-sw-01(config-if)#exit
jxsj-sw-01#write memory
3.5 总公司Catalyst 3524XL交换机配置方案
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#hostname rd-sw-01
rd-sw-01(config)#enable password test
rd-sw-01(config)#enable secret test
rd-sw-01(config)#banner motd % Welcome to the C3524 in the Rao Dian Zong Gong Si %
rd-sw-01(config)#line vty 0 4
rd-sw-01(config.line)#login
rd-sw-01(config.line)#password test
rd-sw-01(config.line)#exit
rd-sw-01(config)#int vlan 1
rd-sw-01(config-if)#ip address 10.234.180.28 255.255.255.0
rd-sw-01(config-if)#exit
rd-sw-01(config)#ip default gateway 10.234.180.234
rd-sw-01(config)#end
rd-sw-01#vlan database
rd-sw-01(vlan)#vtp domain Corp_Net
rd-sw-01(vlan)#vtp client
rd-sw-01(vlan)#exit
rd-sw-01#configure terminal
rd-sw-01(config)#int f0/1
rd-sw-01(config-if)#switchport mode access
rd-sw-01(config-if)#switchport access vlan 34
rd-sw-01(config-if)#exit
rd-sw-01(config)#int f0/2
。。。。。。
rd-sw-01(config)#int f0/24
rd-sw-01(config-if)#switchport mode access
rd-sw-01(config-if)#switchport access vlan 34
rd-sw-01(config-if)#exit
rd-sw-01(config)#int g0/1
rd-sw-01(config-if)#switchport mode trunk
rd-sw-01(config-if)#switchport trunk encapsulation dot1q
rd-sw-01(config-if)#switchport trunk allowed vlan all
rd-sw-01(config-if)#exit
rd-sw-01#write memory
3.6 山楼Catalyst 3524XL交换机配置方案
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#hostname jsl-sw-01
jsl-sw-01(config)#enable password test
jsl-sw-01(config)#enable secret test
jsl-sw-01(config)#banner motd % Welcome to the C3524 in the Jin San Lou %
jsl-sw-01(config)#line vty 0 4
jsl-sw-01(config.line)#login
jsl-sw-01(config.line)#password test
jsl-sw-01(config.line)#exit
jsl-sw-01(config)#int vlan 1
jsl-sw-01(config-if)#ip address 10.234.180.29 255.255.255.0
jsl-sw-01(config-if)#exit
jsl-sw-01(config)#ip default.gateway 10.234.180.234
jsl-sw-01(config)#end
jsl-sw-01#vlan database
jsl-sw-01(vlan)#vtp domain Corp_Net
jsl-sw-01(vlan)#vtp client
jsl-sw-01(vlan)#exit
jsl-sw-1#configure terminal
jsl-sw-1(config)#int f0/1
jsl-sw-1(config-if)#switchport mode access
jsl-sw-1(config-if)#switchport access vlan 35
jsl-sw-1(config-if)#exit
jsl-sw-1(config)#int f0/2
。。。。。。
jsl-sw-1(config)#int f0/24
jsl-sw-1(config-if)#switchport mode access
jsl-sw-1(config-if)#switchport access vlan 35
jsl-sw-1(config-if)#exit
jsl-sw-01(config)#int g0/1
jsl-sw-01(config-if)#switchport mode trunk
jsl-sw-01(config-if)#switchport trunk encapsulation dot1q
jsl-sw-01(config-if)#switchport trunk allowed vlan all
jsl-sw-01(config-if)#exit
jsl-sw-01#write memory
3.7 公司Catalyst 3524XL交换机配置方案
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#hostname wz-sw-01
wz-sw-01(config)#enable password test
wz-sw-01(config)#enable secret test
wz-sw-01(config)#banner motd % Welcome to the C3524 in the Wu Zi Gong Si %
wz-sw-01(config)#line vty 0 4
wz-sw-01(config.line)#login
wz-sw-01(config.line)#password test
wz-sw-01(config.line)#exit
wz-sw-01(config)#int vlan 1
wz-sw-01(config-if)#ip address 10.234.180.30 255.255.255.0
wz-sw-01(config-if)#exit
wz-sw-01(config)#ip default.gateway 10.234.180.234
wz-sw-01(config)#end
wz-sw-01#vlan database
wz-sw-01(vlan)#vtp domain Corp_Net
wz-sw-01(vlan)#vtp client
wz-sw-01(vlan)#exit
wz-sw-1#configure terminal
wz-sw-1(config)#int f0/1
wz-sw-1(config-if)#switchport mode access
wz-sw-1(config-if)#switchport access vlan 36
wz-sw-1(config-if)#exit
wz-sw-1(config)#int f0/2
。。。。。。
wz-sw-1(config)#int f0/24
wz-sw-1(config-if)#switchport mode access
wz-sw-1(config-if)#switchport access vlan 36
wz-sw-1(config-if)#exit
wz-sw-01(config)#int g0/1
wz-sw-01(config-if)#switchport mode trunk
wz-sw-01(config-if)#switchport trunk encapsulation dot1q
wz-sw-01(config-if)#switchport trunk allowed vlan all
wz-sw-01(config-if)#exit
四、CISCO2620路由器配置方案 //8个异步拨号口 一个fast以太口
route#conf t
route(config)#hostname c2620
c2620 (config)#enable secret test
c2620 (config)#enable password test
c2620 (config)#username test password test
c2620 (config)#banner motd “ Welcome to the C2620 in the Office “
c2620 (config)#int f0/0
c2620(config-if)#ip address 10.234.180.254 255.255.255.0
c2620(config-if)#no shutdown
c2620(config-if)#int group-async 1
c2620(config-if)# ip unnumbered FastEthernet0/0
c2620(config-if)#peer default ip address pool default
c2620(config-if)#async mode interactive
c2620(config-if)#async default routing
c2620(config-if)#encap ppp
c2620(config-if)#ppp authen chap pap
c2620(config-if)#group 33 48
c2620(config-if)#exit
c2620(config)#ip local pool default 10.234.180.218 10.234.180.233
c2620(config)#ip routing
c2620(config-if)#exit
c2620(config)#line 33 48
c2620(config-line)#transport input all
c2620(config-line)#autoselect ppp
c2620(config-line)#autocommand ppp
c2620(config-line)# modem autoconfigure discovery
c2620(config-line)#login local
c2620(config-line)#modem inout
c2620(config-line)# stopbits 1
c2620(config-line)# flowcontrol hardware
c2620(config-line)# exit
c2620(config)# line vty 0 4
c2620(config-line)# login
c2620(config-line)# password test
c2620(config-line)# line aux 0
c2620(config-line)# login local
c2620(config-line)# modem inout
c2620(config-line)# modem autoconfigure discovery
c2620(config-line)# transport input all
c2620(config-line)# flowcontrol hardware
c2620(config-line)# exit
c2620(config)#
注：
1、使用用dot1q封装是考虑以后网络扩展加入3com等其它产品，再说大多数工程师载配置事都喜欢用用dot1q封装很少用isl的。
2、使用6509和4006是因为考虑spantree啊，保证在6509down掉后使用4006接管吗，你没看到在6509上Bg-sw-01 (enable) set spantree root 1-40 dia 4 /设为spantree的根，但是你说的子交换机可以通过两根光纤连接到6509上，但是这里6509没有配置双引擎啊，做不到自身冗余啊。
