根据已事先设定好的板厚参数表(请参照‘系统参数设置’中‘板厚参数’),输入板厚数值后,按’回车’则会自动决定速度,速度跟钢板厚度有相当大的关系,依使用者经验而定,如使用者有足够的切割经验,可先于主画面中选择「系统参数设置」中的「钢板厚度参数设置」.使用者可在此自行建立一切割资料表,资料表中可输入各钢板厚度所适用的「切割初速」、「正常速度」、「刀具号码」、「盲孔预热时间」及「明孔预热时间」等切割参数.切割资料表建立好后,进入执行切割画面后,按F4,输入板厚值,便可依切割资料表中的设定值,自动输入切割该厚度钢板时所需要的刀具号码、切割速度、切割初速、盲孔预热时间及明孔预热时间等切割资料；使用者也可直接按F8或F10键.
參考答案:key in plate thickness value as per the settled thickness parameters chart and then press "enter" to set speed automatically, Speed is a main factor to determine thickness, it can be set according to operators' experience.If the operator has full experience in cutting, he may open main interface and then choose [Thickness condition Tab ] from [System parameter]. Operators can create all kinds of cutting data sheets by themselves, and input corresponding parameters for various steel plates such as [inital cutting speed] [normal speed] [pen number] [preheating time for piercing] [preheating time for edge cutting] etc. After establishment of cutting data sheets, open cutting actuating interface and then press "F4" to input plate thickness value, and then the corresponding parameters([inital cutting speed] [normal speed] [pen number] [preheating time for piercing] [preheating time for edge cutting] etc.) of cutting data sheets will work automatically ; Operators can also press F8 or F10 directly.input the cutting parameter.
